TA-3600 amp. - info needed!

edl · 10th April 2006, 06:54 PM

Hi,

has anyone got schematic, PCB, documentation, etc... for this amplifier?
As I know, it was sold as a kitset.
Any information helps.

Thanks a lot,

norstar815 · 11th April 2006, 01:35 PM

im not use to post reply but try this link below if this what you need.

TA-3600 amp

cheers.

mjal

MADMAN_st · 27th April 2006, 08:09 PM

Hi! I couldn't E-mail you, so I'm trying this way to contact you.
I noticed that you posted a schematic of the Castone CPA amplifier.

I was wondering if you could help me about the older type of amp,
it is CPA1200, about 10 or 15 years old.Can you help me find a scheme for it?

HELP!

Thanks!!!

edl · 27th April 2006, 09:34 PM

Hi,

yeah, I know that amplifier, the Castone CPA-1200. These were manufactured about 1990.
But bad news: here in Hungary nobody has the schema of it. I wanted to "draw back" the shema, but I never had a CPA-1200 that I allowed to open.
When I was collecting hungarian PA-amplifier schematics, I tried to get schematics from the manufacturer (Castone), but they didn't give me any one.

The only thing I know of that model, that it's using about +/-100V rails, and the output stage is serial-quasicomplementary with NPN devices.

On the margin, I would help you really gadly, so if you have any question, let's ask it!

All the best,

edl · 28th April 2006, 10:09 AM

Hi,

I talked with a woman from the Castone.
She said the following:
- if the output stage blowen, let's use MJ15003 (onlie geunie Onsemi, be careful with fake transistors!) instead the KD503's.
- for driver let's use MJE15030

At startup let's use a 60W bulb in serial with the primer of the mains transformer!

Regards,

10th April 2006, 06:54 PM	#1
edl diyAudio Member Join Date: Oct 2004	TA-3600 amp. - info needed! Hi, has anyone got schematic, PCB, documentation, etc... for this amplifier? As I know, it was sold as a kitset. Any information helps. Thanks a lot,

11th April 2006, 01:35 PM	#2
norstar815 diyAudio Member Join Date: Jun 2004 Location: manila	hi... im not use to post reply but try this link below if this what you need. TA-3600 amp cheers. mjal __________________ norstar815

27th April 2006, 08:09 PM	#3
MADMAN_st diyAudio Member Join Date: Apr 2006 Location: Vojvodina,Senta	Not exsactly that... Hi! I couldn't E-mail you, so I'm trying this way to contact you. I noticed that you posted a schematic of the Castone CPA amplifier. I was wondering if you could help me about the older type of amp, it is CPA1200, about 10 or 15 years old.Can you help me find a scheme for it? HELP! Thanks!!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A-40 info needed	tuberider	Pass Labs	6	10th February 2009 04:55 AM
Info needed on 1 sub 1 amp	skooter	Car Audio	3	27th July 2008 12:25 AM
Marantz PM-94 info needed	ppereira	Solid State	15	14th September 2004 10:40 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th April 2006, 09:34 PM	#4
edl diyAudio Member Join Date: Oct 2004	Hi, yeah, I know that amplifier, the Castone CPA-1200. These were manufactured about 1990. But bad news: here in Hungary nobody has the schema of it. I wanted to "draw back" the shema, but I never had a CPA-1200 that I allowed to open. When I was collecting hungarian PA-amplifier schematics, I tried to get schematics from the manufacturer (Castone), but they didn't give me any one. The only thing I know of that model, that it's using about +/-100V rails, and the output stage is serial-quasicomplementary with NPN devices. On the margin, I would help you really gadly, so if you have any question, let's ask it! All the best,

28th April 2006, 10:09 AM	#5
edl diyAudio Member Join Date: Oct 2004	Hi, I talked with a woman from the Castone. She said the following: - if the output stage blowen, let's use MJ15003 (onlie geunie Onsemi, be careful with fake transistors!) instead the KD503's. - for driver let's use MJE15030 At startup let's use a 60W bulb in serial with the primer of the mains transformer! Regards,

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read