diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Need help wiring an SAE A501 for 220V (http://www.diyaudio.com/forums/solid-state/74801-need-help-wiring-sae-a501-220v.html)

testlab 26th February 2006 05:47 PM

Need help wiring an SAE A501 for 220V
 
I have an A501 amplifier I need to wire for a 220V primary. Does anyone have hook up info?

gni 18th November 2006 12:49 PM

rewire for 220VAC
 
If inside there are any unused taps on the transformer it
might be possible internally. Remember. . .we are stepping down
the voltage from 120VAC to 40VAC (about 3:1 wind ratio). In a
220VAC situation. . .we will need an almost 6:1 wind ratio to result
the same 40VAC output from the transformer.

Or you could buy a step-down transformer that plugs into the wall
and steps the voltage down before the amp.

Or you could test the voltages and buy a 220VAC version of the
transformer and wire it in. . .internally or externally. . .

Good Luck and let us know how it goes.

Chris Browne

testlab 21st November 2006 01:02 PM

Need to say goodbye
 
To those of you on this site. I regret to inform you that "Testlab" is no longer with us. This is his wife and he passed away August 10, 2006. His real name was Al Sekeet and was a wonderful man.

Please remember him in all of your prayers as his is making the music in heaven sound so much better.

:(

gni 21st November 2006 08:47 PM

Regrets
 
I am so sorry for your loss. Thank-you for letting all of us at
the diyAudio forums know.

Chris Browne


All times are GMT. The time now is 08:40 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2