BF871/872 spice models?anyone?

[bogdan_borko]

BF871/872 spice models?Does enyone has these models?

I need also :IRFP240, IRFP9140 and IRFP9240

[aparatusonitus]

As ordered:

.MODEL BF871 NPN(
+ IS=7.974E-15
+ NF=0.993
+ ISE=2.266E-16
+ NE=1.18
+ BF=122
+ IKF=0.01029
+ VAF=25.51
+ NR=0.999
+ ISC=4.33E-12
+ NC=1.397
+ BR=6.235
+ IKR=0.02746
+ VAR=19.43
+ RB=1
+ IRB=1E-06
+ RBM=0.5
+ RE=0.3814
+ RC=0.439
+ XTB=0
+ EG=1.11
+ XTI=3
+ CJE=1.742E-11
+ VJE=0.4581
+ MJE=0.3092
+ TF=7.073E-10
+ XTF=289.5
+ VTF=6.144
+ ITF=0.1495
+ PTF=0
+ CJC=5.045E-12
+ VJC=0.197
+ MJC=0.1947
+ XCJC=0.1041
+ TR=1E-08
+ CJS=0
+ VJS=0.75
+ MJS=0.333
+ FC = 0.8555)

.SUBCKT IRFP9140 1 2 3
* Model Generated by MODPEX *
*Copyright(c) Symmetry Design Systems*
* All Rights Reserved *
* UNPUBLISHED LICENSED SOFTWARE *
* Contains Proprietary Information *
* Which is The Property of *
* SYMMETRY OR ITS LICENSORS *
*Commercial Use or Resale Restricted *
* by Symmetry License Agreement *
* Model generated on Sep 8, 97
* MODEL FORMAT: SPICE3
* Symmetry POWER MOS Model (Version 1.0)
* External Node Designations
* Node 1 -> Drain
* Node 2 -> Gate
* Node 3 -> Source
M1 9 7 8 8 MM L=100u W=100u
* Default values used in MM:
* The voltage-dependent capacitances are
* not included. Other default values are:
* RS=0 RD=0 LD=0 CBD=0 CBS=0 CGBO=0
.MODEL MM PMOS LEVEL=1 IS=1e-32
+VTO=-3.31597 LAMBDA=0.0162287 KP=10.6969
+CGSO=1.28664e-05 CGDO=1e-11
RS 8 3 0.0551655
D1 1 3 MD
.MODEL MD D IS=4.63513e-09 RS=0.0922215 N=3.5 BV=300
+IBV=10 EG=2 XTI=4 TT=2.40949e-07
+CJO=1.88837e-09 VJ=1.01166 M=0.443093 FC=0.5
RDS 3 1 1e+06
RD 9 1 0.0579364
RG 2 7 7.7926
D2 5 4 MD1
* Default values used in MD1:
* RS=0 EG=1.11 XTI=3.0 TT=0
* BV=infinite IBV=1mA
.MODEL MD1 D IS=1e-32 N=50
+CJO=1.00315e-09 VJ=2.84631 M=0.85675 FC=1e-08
D3 5 0 MD2
* Default values used in MD2:
* EG=1.11 XTI=3.0 TT=0 CJO=0
* BV=infinite IBV=1mA
.MODEL MD2 D IS=1e-10 N=0.400227 RS=3.00001e-06
RL 5 10 1
FI2 7 9 VFI2 -1
VFI2 4 0 0
EV16 10 0 9 7 1
CAP 11 10 2.04824e-09
FI1 7 9 VFI1 -1
VFI1 11 6 0
RCAP 6 10 1
D4 6 0 MD3
* Default values used in MD3:
* EG=1.11 XTI=3.0 TT=0 CJO=0
* RS=0 BV=infinite IBV=1mA
.MODEL MD3 D IS=1e-10 N=0.400227
.ENDS irfp9140

.SUBCKT IRFP9240 1 2 3
* Model Generated by MODPEX *
*Copyright(c) Symmetry Design Systems*
* All Rights Reserved *
* UNPUBLISHED LICENSED SOFTWARE *
* Contains Proprietary Information *
* Which is The Property of *
* SYMMETRY OR ITS LICENSORS *
*Commercial Use or Resale Restricted *
* by Symmetry License Agreement *
* Model generated on Sep 8, 97
* MODEL FORMAT: SPICE3
* Symmetry POWER MOS Model (Version 1.0)
* External Node Designations
* Node 1 -> Drain
* Node 2 -> Gate
* Node 3 -> Source
M1 9 7 8 8 MM L=100u W=100u
* Default values used in MM:
* The voltage-dependent capacitances are
* not included. Other default values are:
* RS=0 RD=0 LD=0 CBD=0 CBS=0 CGBO=0
.MODEL MM PMOS LEVEL=1 IS=1e-32
+VTO=-3.63503 LAMBDA=0.00893783 KP=5.11803
+CGSO=1.09348e-05 CGDO=1.38403e-08
RS 8 3 0.0509569
D1 1 3 MD
.MODEL MD D IS=1.17307e-09 RS=0.192326 N=3.5 BV=300
+IBV=10 EG=2 XTI=4 TT=0.0001
+CJO=1.22283e-09 VJ=3.01469 M=0.679605 FC=0.5
RDS 3 1 1e+06
RD 9 1 0.360179
RG 2 7 6
D2 5 4 MD1
* Default values used in MD1:
* RS=0 EG=1.11 XTI=3.0 TT=0
* BV=infinite IBV=1mA
.MODEL MD1 D IS=1e-32 N=50
+CJO=1.08345e-09 VJ=1.0867 M=0.782022 FC=1e-08
D3 5 0 MD2
* Default values used in MD2:
* EG=1.11 XTI=3.0 TT=0 CJO=0
* BV=infinite IBV=1mA
.MODEL MD2 D IS=1e-10 N=0.405431 RS=3e-06
RL 5 10 1
FI2 7 9 VFI2 -1
VFI2 4 0 0
EV16 10 0 9 7 1
CAP 11 10 1.79859e-09
FI1 7 9 VFI1 -1
VFI1 11 6 0
RCAP 6 10 1
D4 6 0 MD3
* Default values used in MD3:
* EG=1.11 XTI=3.0 TT=0 CJO=0
* RS=0 BV=infinite IBV=1mA
.MODEL MD3 D IS=1e-10 N=0.405431
.ENDS irfp9240

Enjoy, a

[bogdan_borko]

thanks! wath about BF872 and IRFP240?

[aparatusonitus]

No, I don't have BF871 spice model, but I think you can use BF471/472 instead:

.MODEL QBF471 NPN(
+ IS=7.974E-15
+ NF=0.993
+ ISE=2.266E-16
+ NE=1.18
+ BF=122
+ IKF=0.01029
+ VAF=25.51
+ NR=0.999
+ ISC=4.33E-12
+ NC=1.397
+ BR=6.235
+ IKR=0.02746
+ VAR=19.43
+ RB=1
+ IRB=1E-06
+ RBM=0.5
+ RE=0.3814
+ RC=0.439
+ XTB=0
+ EG=1.11
+ XTI=3
+ CJE=1.742E-11
+ VJE=0.4581
+ MJE=0.3092
+ TF=7.073E-10
+ XTF=289.5
+ VTF=6.144
+ ITF=0.1495
+ PTF=0
+ CJC=5.045E-12
+ VJC=0.197
+ MJC=0.1947
+ XCJC=0.1041
+ TR=1E-08
+ CJS=0
+ VJS=0.75
+ MJS=0.333
+ FC = 0.8555)

.MODEL QBF472 PNP(
+ IS = 9.124E-15
+ NF = 0.9904
+ ISE = 1.672E-15
+ NE = 1.527
+ BF = 198.2
+ IKF = 0.13
+ VAF = 465.9
+ NR = 0.99
+ ISC = 2.139E-13
+ NC = 1.08
+ BR = 1.256
+ IKR = 0.1
+ VAR = 13
+ RB = 5
+ IRB = 1E-06
+ RBM = 0.5
+ RE = 0.635
+ RC = 1.42
+ XTB = 0
+ EG = 1.11
+ XTI = 3
+ CJE = 1.447E-11
+ VJE = 0.8484
+ MJE = 0.3884
+ TF = 1.38E-09
+ XTF = 21.78
+ VTF = 2
+ ITF = 0.065
+ PTF = 0
+ CJC = 8.483E-12
+ VJC = 0.6298
+ MJC = 0.4561
+ XCJC = 0.619
+ TR = 1E-32
+ CJS = 0
+ VJS = 0.75
+ MJS = 0.333
+ XTB = 0
+ XTI = 3
+ EG = 1.11
+ FC = 0.99)

.SUBCKT IRFP240 1 2 3
* Model Generated by MODPEX *
*Copyright(c) Symmetry Design Systems*
* All Rights Reserved *
* UNPUBLISHED LICENSED SOFTWARE *
* Contains Proprietary Information *
* Which is The Property of *
* SYMMETRY OR ITS LICENSORS *
*Commercial Use or Resale Restricted *
* by Symmetry License Agreement *
* Model generated on Sep 8, 97
* MODEL FORMAT: SPICE3
* Symmetry POWER MOS Model (Version 1.0)
* External Node Designations
* Node 1 -> Drain
* Node 2 -> Gate
* Node 3 -> Source
M1 9 7 8 8 MM L=100u W=100u
* Default values used in MM:
* The voltage-dependent capacitances are
* not included. Other default values are:
* RS=0 RD=0 LD=0 CBD=0 CBS=0 CGBO=0
.MODEL MM NMOS LEVEL=1 IS=1e-32
+VTO=4.15537 LAMBDA=0.00457587 KP=11.1214
+CGSO=1.21186e-05 CGDO=1e-11
RS 8 3 0.0711966
D1 3 1 MD
.MODEL MD D IS=3.27916e-09 RS=0.010683 N=1.39247 BV=300
+IBV=10 EG=1 XTI=4 TT=0
+CJO=1.2793e-09 VJ=3.00973 M=0.689847 FC=0.5
RDS 3 1 1e+06
RD 9 1 0.0484688
RG 2 7 5.695
D2 4 5 MD1
* Default values used in MD1:
* RS=0 EG=1.11 XTI=3.0 TT=0
* BV=infinite IBV=1mA
.MODEL MD1 D IS=1e-32 N=50
+CJO=2.49691e-09 VJ=0.925116 M=0.9 FC=1e-08
D3 0 5 MD2
* Default values used in MD2:
* EG=1.11 XTI=3.0 TT=0 CJO=0
* BV=infinite IBV=1mA
.MODEL MD2 D IS=1e-10 N=0.402145 RS=3e-06
RL 5 10 1
FI2 7 9 VFI2 -1
VFI2 4 0 0
EV16 10 0 9 7 1
CAP 11 10 2.49691e-09
FI1 7 9 VFI1 -1
VFI1 11 6 0
RCAP 6 10 1
D4 0 6 MD3
* Default values used in MD3:
* EG=1.11 XTI=3.0 TT=0 CJO=0
* RS=0 BV=infinite IBV=1mA
.MODEL MD3 D IS=1e-10 N=0.402145
.ENDS irfp240

[bogdan_borko]

my simterix don`t recognize these models...
wath extension they should have ?
txt, lib, mod ...? I tried everything!!!

please help!

thanx