Anyone intrested in a DIY BOZAK preamp/mixer?

DJNUBZ · 31st January 2006, 03:42 AM

These mixers go for some serious money due to being so rare and because they sound so good. Do you think it would be possible to build a clone or if there are a enough people a clone kit for this mixer? Would anyone here be intrested in this mixer? I am sure it could be made into an intresting preamp.

http://djdalelee.tripod.com/bozak.html

I also was curious if something like this could be improved upon. I had this crazy idea at one point of using a ono clone for the phono pre amps but that may be a bit over kill.

d3imlay · 1st February 2006, 12:17 AM

I found one at a hamfest about 15 years ago. It's had intermittent problems that I've had trouble locating. I still use it at the local baseball park for music and vocals. UREI made the 1620 mixer that looked almost the same and was very similar. However it used all opamps as opposed to discrete devices in the bozak.

DJNUBZ · 1st February 2006, 04:25 AM

Intrested in a selling it or trading?

destroyer X · 1st February 2006, 08:48 AM

them...as i do not have them in my junk box.

I love to use my parts...they are waiting to be used.

And i am needing something very portable with cue to monitor...nice small cue amplifier...very nice supply too.

regards,

Carlos

31st January 2006, 03:42 AM	#1
DJNUBZ diyAudio Member Join Date: May 2003 Location: Chicago	Anyone intrested in a DIY BOZAK preamp/mixer? These mixers go for some serious money due to being so rare and because they sound so good. Do you think it would be possible to build a clone or if there are a enough people a clone kit for this mixer? Would anyone here be intrested in this mixer? I am sure it could be made into an intresting preamp. http://djdalelee.tripod.com/bozak.html I also was curious if something like this could be improved upon. I had this crazy idea at one point of using a ono clone for the phono pre amps but that may be a bit over kill. __________________ http://www.caraudioconnoisseur.com/

1st February 2006, 04:25 AM	#3
DJNUBZ diyAudio Member Join Date: May 2003 Location: Chicago	Intrested in a selling it or trading? __________________ http://www.caraudioconnoisseur.com/

1st February 2006, 08:48 AM	#4
destroyer X diyAudio Member Join Date: Feb 2004 Location: Recife - Brasil Northeast	I am already doing...i am interested, and will suppress those Fets...will substitute them...as i do not have them in my junk box. I love to use my parts...they are waiting to be used. And i am needing something very portable with cue to monitor...nice small cue amplifier...very nice supply too. regards, Carlos __________________ Try to build an amplifier folks ... it is pure adrenaline!.. when not work first time, then becomes a nice challenge...and we usually overcome the trouble... and we feel very well to be mastering the machine.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Preamp/mixer design help	ShutterCat	Solid State	10	27th January 2008 09:42 PM
Preamp between mixer and soundcard.	kni52	Solid State	5	19th November 2007 06:57 PM
Fs: Bozak Cma-6-50a Amplifier/mixer	amisdad	Swap Meet	0	27th January 2005 07:15 AM
Tube mic preamp/mixer	Sir Trefor	Tubes / Valves	31	21st November 2004 09:52 PM
Mixer Preamp	s0rce	Solid State	0	13th December 2002 02:12 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st February 2006, 12:17 AM	#2
d3imlay diyAudio Member Join Date: Sep 2004 Location: Ohio	I found one at a hamfest about 15 years ago. It's had intermittent problems that I've had trouble locating. I still use it at the local baseball park for music and vocals. UREI made the 1620 mixer that looked almost the same and was very similar. However it used all opamps as opposed to discrete devices in the bozak.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read