My first project, cool project.

sorinsistem · 18th January 2006, 10:10 PM

Hi All !

First of all I want to say that I admire youre work and personal projects , and each one of you had a significant contribution to the diy world , especially to the amplifiers section, that I might say , it's the most accesible and approachable subject for the majority of us.
If you have five minutes to take a look to my project and give youre opinions obout the good and the bad parts , y would be verry grateful.
The power stage y've used is a verry fine sounding amplifier kit , and here is the reference schematic of the amplifier : http://www.elprod.ro/images2/sch0001.gif --> http://www.elprod.ro/power_amplifier.html, maybe for you it isn't such a big deal of schematic , but y want to say that y was impressed astonished by the sound of this audio power stage , a small description would be , a werry well controlled and non fatiguing base (pls excuse my eng) , verry clear and crisper highs and general feeling of high detailed sound , maybe y'm exagerating a little , but that was my first impression.
The final stage is built around the IRFP240 , IRFP9240
The case is based on a copper pipe structure , this is one of the images that i took during construction : http://www.elprod.ro/diy/forum/danip...oject1/10m.jpg
More images with this project , and construction details you will find at this link: Romanian version for DiyAudio.com -->> http://forum.diyaudio.ro/viewtopic.php?t=55

More photos for this project.

FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/10.jpg

FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/11.jpg

FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/12.jpg

FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/13.jpg

FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/14.jpg

FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/15.jpg

FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/16.jpg

FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/17.jpg

pinkmouse · 18th January 2006, 10:16 PM

Very nice!

I was thinking of using copper pipe for my Krell clone, but now I'll have to think of something different.

gmilitano · 19th January 2006, 03:06 AM

Very nice indeed. Are you planning on using a cover?

muzyk_ant · 19th January 2006, 05:08 PM

there will be a cover, just the same as the bottom and the lateral parts (holes) will be covered in the same stile brushet plexyglass

18th January 2006, 10:10 PM	#1
sorinsistem diyAudio Member Join Date: Jan 2004 Location: Romania	My first project, cool project. Hi All ! First of all I want to say that I admire youre work and personal projects , and each one of you had a significant contribution to the diy world , especially to the amplifiers section, that I might say , it's the most accesible and approachable subject for the majority of us. If you have five minutes to take a look to my project and give youre opinions obout the good and the bad parts , y would be verry grateful. The power stage y've used is a verry fine sounding amplifier kit , and here is the reference schematic of the amplifier : http://www.elprod.ro/images2/sch0001.gif --> http://www.elprod.ro/power_amplifier.html, maybe for you it isn't such a big deal of schematic , but y want to say that y was impressed astonished by the sound of this audio power stage , a small description would be , a werry well controlled and non fatiguing base (pls excuse my eng) , verry clear and crisper highs and general feeling of high detailed sound , maybe y'm exagerating a little , but that was my first impression. The final stage is built around the IRFP240 , IRFP9240 The case is based on a copper pipe structure , this is one of the images that i took during construction : http://www.elprod.ro/diy/forum/danip...oject1/10m.jpg More images with this project , and construction details you will find at this link: Romanian version for DiyAudio.com -->> http://forum.diyaudio.ro/viewtopic.php?t=55 More photos for this project. FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/10.jpg FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/11.jpg FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/12.jpg FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/13.jpg FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/14.jpg FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/15.jpg FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/16.jpg FOTO MARE :arrow: http://www.elprod.ro/diy/forum/danipasc/project1/17.jpg __________________ PERFECT SOUND

18th January 2006, 10:16 PM	#2
pinkmouse diyAudio Moderator Join Date: Apr 2002 Location: Chatham, England	Very nice! I was thinking of using copper pipe for my Krell clone, but now I'll have to think of something different. __________________ Al I conceive of nothing, in religion, science or philosophy, that is more than the proper thing to wear, for a while. Charles Fort

19th January 2006, 03:06 AM	#3
gmilitano diyAudio Member Join Date: Apr 2004 Location: Winnipeg, Manitoba	Very nice indeed. Are you planning on using a cover? __________________ DIY Audio Projects [ 10" DIY Subwoofer \| FE127E Sealed Bipole \| [ LM3886 Chip Amp / Gainclone \| K-12M Tube Amp Kit ]

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CDPRO2 Group Project (open source project)	BrianGT	Digital Source	147	8th August 2008 11:37 AM
Thought I'd share a cool project	flaevor	Multi-Way	12	13th June 2005 08:45 PM
LANpipe = very cool project	Sparhawk	Digital Source	8	27th May 2003 08:31 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th January 2006, 05:08 PM	#4
muzyk_ant diyAudio Member Join Date: Jan 2006 Location: Cluj-N.	there will be a cover, just the same as the bottom and the lateral parts (holes) will be covered in the same stile brushet plexyglass

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read