|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
4th December 2005, 02:25 PM
|
#1 |
|
diyAudio Member
Join Date: Feb 2004
Location: Germany
|
Parasound HCA-2200 protection & sensitivity
Hello,
just got this Amplifier and noticed that the output relay will disconnect the signal 1 or 2 seconds after switching off. Is this behavior correct for the amp, or is it a failure in the protection circuit? The Amp´s delay ciruit after power-on is okay (2 ...3 seconds) I need 2 Veff for full power (1KHz clipping level) Is this the normal sensitivity for the 2200? Offset, distortion, power etc is 100% in range. thanks Hardi |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How to mod a parasound hca 2200 mk2 ? | Søren Kramer | Solid State | 12 | 14th April 2013 11:43 PM |
| Parasound HCA-2200 II repair question | cocolino | Solid State | 10 | 6th September 2008 07:45 AM |
| FS: Parasound HCA-2200 MKII | Zero Cool | Swap Meet | 3 | 22nd December 2007 08:15 PM |
| Anyone have a service manual for a Parasound 2200 (non II) | marsupialx | Solid State | 2 | 8th December 2007 01:48 PM |
| Need Schematic for Parasound HCA 2200 II | mjctech | Solid State | 2 | 15th September 2005 04:25 PM |
| New To Site? | Need Help? |
