finished project

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
this is my system I`v just finished working on
There are 2 amps, a 400w esp amp i`v built driving a 15inch sub, and a 100w amp driving 10 3inch drivers connected as a 1.5ohm load.

the esp amp is water cooled, with a radiator, pump 6 computer fans temperatur meter etc. I also bult a crossover for spiting the high and low signal feeds to the amps. there is also 2 led vu meters.
 

Attachments

  • imga0044.jpg
    imga0044.jpg
    19.6 KB · Views: 384
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.