Samson s1000 modification - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 18th November 2005, 05:18 AM   #1
rkc7 is offline rkc7  United States
diyAudio Member
rkc7's Avatar
Join Date: May 2004
Location: Toledo, OH
Default Samson s1000 modification

I just purchased a "non-functional" Samson S1000 amplifier and am going to fix up. Anyway, I was looking for some replacements for the transistors which are probably blown, but now I'm not sure these are the original output transistors.

The ones in there are Sanken A1492/C3856, are these the original transistors? The reason I suspect they aren't original is because there is flux around the leads and a few other places look like the non-factory soldering.

I've been trying to find a service manual/schematic/parts list/something, but can't. Any help would be appreciated.

Also, if anyone could get a close-up picture of the amplifier board of one of the channels for me to compare, that would be great.
Disclaimer: I may be wrong, I may be right. I'd rather believe that I do know what I'm talking about, but am always willing to be told I don't.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
samson servo 260 advice please gary h Solid State 0 14th December 2008 08:06 PM
Schematics for Audio Innovations s1000 pre Pengvim Tubes / Valves 0 13th March 2008 03:34 PM
samson 700 amp for subs lowfi Multi-Way 9 14th July 2007 02:35 AM
Trying to fix this Samson amp rkc7 Solid State 29 31st May 2006 02:42 AM
yamaha cdr-s1000 vacuum display replacement gmunee Digital Source 0 10th April 2005 06:00 PM

New To Site? Need Help?

All times are GMT. The time now is 09:41 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2