What size toroid will I need for a JLH 69 10W/channel? We're choosing parts right now and I would like some input on how big to oversize this thing.
We're looking at needed around 22 to 24Vac out of the toroid and going into a 7824 per channel. Not sure what Iq point yet, but am considering 24Vdc at around 1 to 2 amp. I want plenty of overhead for the best bass I can get.
Toroids, EI core, R-core??? I like Plitron so I'm leaning in that direction, but would consider all recommendations and sources.
Looking for quality.
Also does dual mono transformers really give any better performance over a single dual secondary big guy?
I was thinking of using at least 100VA per channel, but I am unsure how to provide ample power but not overkill it.
thanks,
Tommytube
We're looking at needed around 22 to 24Vac out of the toroid and going into a 7824 per channel. Not sure what Iq point yet, but am considering 24Vdc at around 1 to 2 amp. I want plenty of overhead for the best bass I can get.
Toroids, EI core, R-core??? I like Plitron so I'm leaning in that direction, but would consider all recommendations and sources.
Looking for quality.
Also does dual mono transformers really give any better performance over a single dual secondary big guy?
I was thinking of using at least 100VA per channel, but I am unsure how to provide ample power but not overkill it.
thanks,
Tommytube
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.