SPK protection delay to close circuit - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 28th October 2005, 02:59 PM   #1
diyAudio Member
Join Date: May 2005
Location: HK
Angry SPK protection delay to close circuit

Hello there,

Seek help with you how to modify the following cct. so as to add 5 to 10 seconds delay then close the relay again, after the DC detected and activated the circuit ( Relay open )


I found the relay on/off alternatively in short period when I tested my AMP therefore have this thinking.

  Reply With Quote
Old 28th October 2005, 03:09 PM   #2
Did it Himself
diyAudio Member
richie00boy's Avatar
Join Date: Nov 2003
Location: Gloucestershire, England, UK
If the circuit has tripped due to DC you wouldn't want the relay to close again after a while because you will damage something as DC faults don't tend to fix themselves.

If the circuit is tripping on power up that is what should happen - it keeps the relay open while things settle down. Just make sure you have connected it as shown in the project or it will only detect the DC thump at start therefore will click closed then open then closed.
www.readresearch.co.uk my website for UK diy audio people - designs, PCBs, modules and more.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
NAD C320 Amp Protection delay help please Kajman Solid State 2 15th December 2007 03:24 PM
help with an ne555 delay circuit jarthel Parts 8 19th October 2006 01:14 AM
6 channel Speaker Protection and power on delay sachi Chip Amps 6 18th November 2005 04:58 PM
Trouble with speaker protection circuit (Randy Slone's circuit) whalefat Solid State 3 13th April 2005 10:13 AM
B+ delay circuit joeling39 Tubes / Valves 11 23rd September 2003 11:38 PM

New To Site? Need Help?

All times are GMT. The time now is 02:22 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2