Schematic for TEAC BX-330 Stereo DC Integrated Amplifier Needed

John Biles · 4th October 2005, 12:02 PM

Hello Everyone,
I was given a TEAC BX-330 Stereo DC Integrated Amplifier 5 years ago and have used it on and off over that period.
As it not a bad little amp ( 35watts RMS per channel ) It would be handy to have a schematic if I need to repair it, has anyone got one.
Any help would be appreciated.

destroyer X · 4th October 2005, 01:30 PM

This one seems to be hard to find...maybe Ebay.

regards,

Carlos

Fritzell · 4th October 2005, 03:24 PM

Found a place where you can buy service manuals:
http://www.manuals-in-pdf.com/bx330-p-186179.html

John Biles · 5th October 2005, 01:14 AM

Thankyou Destroyer and Fritzell for searching and info.
I will wait a month or so just incase someone has a link to the manual for free before buying it.
Thanks for your time

destroyer X · 5th October 2005, 10:11 AM

some amplifier, we must have the rigth to have schematics...as we bougth the entire package, the freedom to have the circuit details, the rigth to fix by ourselves...if not, a black box was bougth...we cannot have sure if the weigth is a transformer or a stone inside.

A friend asked a huge and heavy power supply to his Transceiver, and we have many guys that loves to make jokes.... they prepared an enormous 50 ampéres supply with a 100 miliamperes 12 volts transformer inside, only to ligth the lamps and they filled the entire enclosure with stones...heavy supply isnt'it?

The guy paid, was a Radio Amateur meeting.... all the group friends heard him negotiating using radio for that, and we knew he ordered the supply and the weekly meeting to have his supply, custom made, done and ready to go.

That day was terrible funny, i felt pains so much i laugh...everybody knowing, the only one that had not the knowledge was Jorge, the buyer!

He paid, and hold the enormous box and tried not to show that was too much heavy, because the friend's jokes, something we usually make here...and it is forbidden to turn nervous, to have angry...cannot!....not allowed those things in our group, have to face kiddings with courage!... was terrible funny people laughing muffling laugh with their shirts....people rubish and feeling down from the chairs...and he made enormous effort not to show that was "too much heavy".... and put it inside his car..... the car gonne down.... so heavy that suspension descend the automobile 4 to 5 inches... the front up and the automobile back down...and he gone, satisfied with his new "heavy supply".

He returned....laughing to our meeting...was very funny to everybody...he keept the good mood, received his money back and another good supply was separated for him...this one, without stones inside.

regards,

Carlos

jhonrafael23 · 21st January 2010, 12:57 AM

I nedd schematics diagram TEAC BX-330 DC Stereo Integrated Amplifier Needed

hifiplant · 19th February 2011, 11:06 AM

Hi,

I have found a schematic service manual for the bx 330 but I am looking for a user manual for the bx 330.

I'll see if I can attach a copy here.

If anyone can help with a user manual it would be appreciated.

Thanks

4th October 2005, 12:02 PM	#1
John Biles diyAudio Member Join Date: May 2005 Location: Victoria Australia	Schematic for TEAC BX-330 Stereo DC Integrated Amplifier Needed Hello Everyone, I was given a TEAC BX-330 Stereo DC Integrated Amplifier 5 years ago and have used it on and off over that period. As it not a bad little amp ( 35watts RMS per channel ) It would be handy to have a schematic if I need to repair it, has anyone got one. Any help would be appreciated.

4th October 2005, 01:30 PM	#2
destroyer X diyAudio Member Join Date: Feb 2004 Location: Recife - Brasil Northeast	I have searched everywhere John...could not find! This one seems to be hard to find...maybe Ebay. regards, Carlos __________________ Try to build an amplifier folks ... it is pure adrenaline!.. when not work first time, then becomes a nice challenge...and we usually overcome the trouble... and we feel very well to be mastering the machine.

5th October 2005, 10:11 AM	#5
destroyer X diyAudio Member Join Date: Feb 2004 Location: Recife - Brasil Northeast	Yes John, this is fair, those informs must be openned to everybody,as when we buy the some amplifier, we must have the rigth to have schematics...as we bougth the entire package, the freedom to have the circuit details, the rigth to fix by ourselves...if not, a black box was bougth...we cannot have sure if the weigth is a transformer or a stone inside. A friend asked a huge and heavy power supply to his Transceiver, and we have many guys that loves to make jokes.... they prepared an enormous 50 ampéres supply with a 100 miliamperes 12 volts transformer inside, only to ligth the lamps and they filled the entire enclosure with stones...heavy supply isnt'it? The guy paid, was a Radio Amateur meeting.... all the group friends heard him negotiating using radio for that, and we knew he ordered the supply and the weekly meeting to have his supply, custom made, done and ready to go. That day was terrible funny, i felt pains so much i laugh...everybody knowing, the only one that had not the knowledge was Jorge, the buyer! He paid, and hold the enormous box and tried not to show that was too much heavy, because the friend's jokes, something we usually make here...and it is forbidden to turn nervous, to have angry...cannot!....not allowed those things in our group, have to face kiddings with courage!... was terrible funny people laughing muffling laugh with their shirts....people rubish and feeling down from the chairs...and he made enormous effort not to show that was "too much heavy".... and put it inside his car..... the car gonne down.... so heavy that suspension descend the automobile 4 to 5 inches... the front up and the automobile back down...and he gone, satisfied with his new "heavy supply". He returned....laughing to our meeting...was very funny to everybody...he keept the good mood, received his money back and another good supply was separated for him...this one, without stones inside. regards, Carlos __________________ Try to build an amplifier folks ... it is pure adrenaline!.. when not work first time, then becomes a nice challenge...and we usually overcome the trouble... and we feel very well to be mastering the machine.

19th February 2011, 11:06 AM	#7
hifiplant diyAudio Member Join Date: Feb 2011	teac bx 330 schematic Hi, I have found a schematic service manual for the bx 330 but I am looking for a user manual for the bx 330. I'll see if I can attach a copy here. If anyone can help with a user manual it would be appreciated. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th October 2005, 03:24 PM	#3
Fritzell diyAudio Member Join Date: Jul 2004 Location: Sweden	Found a place where you can buy service manuals: http://www.manuals-in-pdf.com/bx330-p-186179.html

5th October 2005, 01:14 AM	#4
John Biles diyAudio Member Join Date: May 2005 Location: Victoria Australia	Thankyou Destroyer and Fritzell for searching and info. I will wait a month or so just incase someone has a link to the manual for free before buying it. Thanks for your time

21st January 2010, 12:57 AM	#6
jhonrafael23 diyAudio Member Join Date: Jan 2010 Location: Bogotá	I nedd schematics diagram TEAC BX-330 DC Stereo Integrated Amplifier Needed

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pioneer A-676 amplifier schematic needed	pinco	Solid State	3	17th April 2010 12:14 AM
Model 16LS Stereo Integrated Tube Amplifier	jmillerdoc	Tubes / Valves	0	13th June 2009 08:00 PM
Cambridge audio A5 integrated amplifier schematic	cahillj	Solid State	1	11th April 2009 01:54 AM
Schematic For Plate Amplifier Needed	jtsaudio	Solid State	2	7th March 2009 09:17 AM
AM/FM Antenna amplifier schematic needed	hifi	Everything Else	0	25th October 2002 05:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read