NAD 705 Stereo Receiver Service Manual?
I am using my "old" NAD 705 Stereo Reciever mostly as Preamp and Tuner in conjunction with the PC and a "gainclone" as poweramp.
Some days ago, I changed two opamps (4558 and 2068) by OPA2134.
I wondered myself about not figuring out any bypass caps nearby these chips.
So I attached 470uF Panasonic direct at the voltage pins to ground.
Result: 100Hz buzz.
I tried different value of caps and tried to figure out another gnd plane.
But, still buzzing, with or without additional bypass caps. When I insert the original opamps:
Silence, as it has to be.
Now, I am looking for a service manual for this amp, but NAD manuals seems to be hard to find.
I got mine (manual) from ebay for around $13US shipped. I think there are always a couple listed. If you're still looking.
try to place a feedback compensation cap.
TRy www.servicemanuals.net. They specialize in service manuals for virtually all brands of consumer hi-fi products. They also carry most replacement remote controls.
|All times are GMT. The time now is 09:57 PM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio