some power amplifier recomendations

[marus]

I'm interested too in K6 SMPS.
Here some pictres with components used : http://www.yo9hjl.go.ro/smps.html
I made this in air ... for testing first.
But I'm afraid tu plug it in ....
Tomorrow i wil put a picture with the smps....

 

[marus]

Daniel, this is my messenger ID : YO9HJL

 

[cd-i]

It seems that nobody is interested about this topic anymore..

I am curious to know if anybody has built the K6 power supply. I want to know if the specifications on the schematic were enough to built it or not.


Regards,

Daniel

 

[viktor1986]

What's with this topic?

Cd-i, have you built this smps power supply?

 

[microsim444]

A&T LABS

I am working at the K6 Project. I am wondering if any one succeeded with building it?

And I cannot contact A&T labs. they dont have a valid e-mail.

Any one who suceeded into making this circuit working please tel me.

Microsim4@yahoo.com


Thanks in advance

 

[microsim444]

K6_PSU

I was looking at the prices for the transformers, some of them is dificult to obtain some its impossible to obtain,
and AandT Labs are not responding to any e-mail messages.

I will start working into this SMPS right a way with the guids avaialble abou the GATE DRIVE transformers

 

[microsim444]

K6 - Power Supply

Nop...

I built this supply from scratch, and it seems that this design has many problems, and it will only work if you have the original transformers, and the PCB, since its really critical, and the design is not that smart.



I spent lot of money on making that supply, I burned many mosfets, while testings. its worthless to continue


Sm

 

[os12300]

Hello! I also want to build this source and for this I have a magazine containing this project, make the type dimension T2 transformer as it is: 846T250-3C8 TOROID OF FERROXCUBE, here shown in number of turns to build, if someone inetresa and want help with taste'll upload pictures of that project (magazine).
Does anyone know of a substitute for the toroid?.
Gracias...

 

[mukapotap]

It's 7/8'' toroid.