CS 8ooX schematic

gtrtech · 1st August 2005, 04:20 AM

I need a peavey cs800X schematic bad, Anyone know where I can find one?
Thanks
Tony

Enzo · 2nd August 2005, 05:19 AM

Yes, from Peavey. Call them at 601-483-5365 and go to parts. Request the schematics. Generally they email them for free. In some cases they send paper copies on 11x17 and charge a small $2.50. The drawings include parts layout and parts lists. Peavey will sell you any part in it if you can't find it on the open market. Their prices are reasonable. I buy the output devices generically from ALlied, but PV prices are not out of line.

You can also email parts@peavey.com but that usually takes longer.

teemce · 2nd August 2005, 09:03 AM

Hi!

I sent mail for you!

TMC

gtrtech · 2nd August 2005, 09:03 AM

Thanks Enzo

gtrtech · 2nd August 2005, 01:32 PM

TMC
Thanks, That link helped alot.
Tony

Netlist · 2nd August 2005, 06:04 PM

Tony, what's wrong with the unit?

/Hugo

gtrtech · 2nd August 2005, 07:42 PM

Netlist
After it heats up it loses volume on one side. I'm thinking a resistor is going, not sure though.
Tony

Netlist · 2nd August 2005, 07:51 PM

Does the DDT LED light up or is it more like the amp playing on drivers instead of output transistors?

/Hugo

gtrtech · 5th August 2005, 07:48 PM

Hugo
I'm not sure yet, I havent dove into it totaly yet. I've been haveing a ptoblem w/ a crate pa6fx. The guy brought it to me and said it was smoking, He also said someone plugged a input into a output, (not sure what he ment by that) I opened it up and a hole section of the board was burned out. I replaced all the parts the was visibly burned out and a few others that I thought would give me problems. I had to do a hard wire for a point of the board that was bad but that came out alrigth. I then plugged it in and it started humming and smoking, I then relized I should have first checked the transistors, I found 3 bad ones ( 2 MJ15022 and 1 MJE15030 ) so I replaced them, made sure all the parts I replaced the first time (22 in all) was still good put it all back together plugged it in and turned it on, it started huming again and then blew out the fuse. now I have it all apart again. I am now thinking maybe I shouldn't of took this project on but this stubborn side of me won't say no or give up.
Tony

Netlist · 5th August 2005, 07:53 PM

In that case you surely need a schematic. If you don't have it already, mail me. I whish you good luck.

/Hugo

1st August 2005, 04:20 AM	#1
gtrtech diyAudio Member Join Date: Aug 2005 Location: Arizona	CS 8ooX schematic I need a peavey cs800X schematic bad, Anyone know where I can find one? Thanks Tony

2nd August 2005, 09:03 AM	#3
teemce diyAudio Member Join Date: Jun 2004 Location: HUN	Schematic link Hi! I sent mail for you! TMC

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
looking for a pre-amp schematic	steamPunk	Tubes / Valves	3	3rd August 2008 01:49 PM
DBX 500 schematic	d3imlay	Solid State	0	2nd August 2008 05:12 PM
F3 schematic	kenev	Pass Labs	2	24th January 2008 03:24 PM
Need Six-pac amp schematic	Sarge	Tubes / Valves	1	31st July 2004 08:30 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

2nd August 2005, 05:19 AM	#2
Enzo diyAudio Member Join Date: Sep 2004 Location: Lansing, Michigan	Yes, from Peavey. Call them at 601-483-5365 and go to parts. Request the schematics. Generally they email them for free. In some cases they send paper copies on 11x17 and charge a small $2.50. The drawings include parts layout and parts lists. Peavey will sell you any part in it if you can't find it on the open market. Their prices are reasonable. I buy the output devices generically from ALlied, but PV prices are not out of line. You can also email parts@peavey.com but that usually takes longer.

2nd August 2005, 01:32 PM	#5
gtrtech diyAudio Member Join Date: Aug 2005 Location: Arizona	TMC Thanks, That link helped alot. Tony

2nd August 2005, 06:04 PM	#6
Netlist diyAudio Moderator Join Date: Jan 2003	Tony, what's wrong with the unit? /Hugo

2nd August 2005, 07:42 PM	#7
gtrtech diyAudio Member Join Date: Aug 2005 Location: Arizona	Netlist After it heats up it loses volume on one side. I'm thinking a resistor is going, not sure though. Tony

2nd August 2005, 07:51 PM	#8
Netlist diyAudio Moderator Join Date: Jan 2003	Does the DDT LED light up or is it more like the amp playing on drivers instead of output transistors? /Hugo

5th August 2005, 07:48 PM	#9
gtrtech diyAudio Member Join Date: Aug 2005 Location: Arizona	Hugo I'm not sure yet, I havent dove into it totaly yet. I've been haveing a ptoblem w/ a crate pa6fx. The guy brought it to me and said it was smoking, He also said someone plugged a input into a output, (not sure what he ment by that) I opened it up and a hole section of the board was burned out. I replaced all the parts the was visibly burned out and a few others that I thought would give me problems. I had to do a hard wire for a point of the board that was bad but that came out alrigth. I then plugged it in and it started humming and smoking, I then relized I should have first checked the transistors, I found 3 bad ones ( 2 MJ15022 and 1 MJE15030 ) so I replaced them, made sure all the parts I replaced the first time (22 in all) was still good put it all back together plugged it in and turned it on, it started huming again and then blew out the fuse. now I have it all apart again. I am now thinking maybe I shouldn't of took this project on but this stubborn side of me won't say no or give up. Tony

5th August 2005, 07:53 PM	#10
Netlist diyAudio Moderator Join Date: Jan 2003	In that case you surely need a schematic. If you don't have it already, mail me. I whish you good luck. /Hugo

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)