Levinson Schematics 27.5 and ML10A

Adak · 24th June 2005, 04:21 PM

I started by doing a google search & wound up here after not being able to pin down a link. A search here also failed. If this information is archived somewhere, perhaps some further info in addition to the FAQ?

Looking for the schematic or at least the values on the transformer for the ML10A preamp.

The schematic for a 27.5 power amp.

Any info greatly appreciated!

amplifierguru · 27th June 2005, 12:28 AM

Add the 20.5 - the one with the unsaleable high hum and noise which I fixed for them! And the 23.5 - the one the same 'designer' was working on when I was there and picked my brains at every turn for design knowledge. See if he gleaned anything.

Cheers,
Greg

jacco vermeulen · 27th June 2005, 08:31 AM

Adak,

if you don't have the schematic by now, can you send me an email?

YUTK · 27th June 2005, 08:37 AM

pls send to me too for my reference

senee · 5th July 2005, 02:19 PM

Please send the schematic to me.

Thanks,

aht · 5th July 2005, 03:39 PM

Cool...
I hope that you never forget me

Please me too.
AHT

24th June 2005, 04:21 PM	#1
Adak diyAudio Member Join Date: Jun 2005 Location: Richmond, VA	Levinson Schematics 27.5 and ML10A I started by doing a google search & wound up here after not being able to pin down a link. A search here also failed. If this information is archived somewhere, perhaps some further info in addition to the FAQ? Looking for the schematic or at least the values on the transformer for the ML10A preamp. The schematic for a 27.5 power amp. Any info greatly appreciated!

27th June 2005, 08:31 AM	#3
jacco vermeulen diyAudio Member Join Date: Oct 2004 Location: At the sea front, Rotterdam or Curaçao	Adak, if you don't have the schematic by now, can you send me an email? __________________ Not so much,.......if it says "ZM" in the corner.

5th July 2005, 02:19 PM	#5
senee diyAudio Member Join Date: Jun 2004 Location: Central in Thailand	Please send the schematic to me. Thanks, __________________ Senee

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mark Levinson Ml 1 schematics	mark_titano	Solid State	2	28th October 2004 12:38 PM
Mark Levinson No 23 schematics	gianc	Solid State	1	15th October 2004 09:38 PM
Mark Levinson No 23 schematics	gianc	Parts	0	13th October 2004 06:09 PM
Mark Levinson 38 S Schematics	dismalonyx	Parts	1	25th September 2003 08:37 AM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th June 2005, 12:28 AM	#2
amplifierguru Account Disabled Join Date: Aug 2004 Location: Earth	Add the 20.5 - the one with the unsaleable high hum and noise which I fixed for them! And the 23.5 - the one the same 'designer' was working on when I was there and picked my brains at every turn for design knowledge. See if he gleaned anything. Cheers, Greg

27th June 2005, 08:37 AM	#4
YUTK diyAudio Member Join Date: Jan 2005 Location: BANKKOK	pls send to me too for my reference

5th July 2005, 03:39 PM	#6
aht Account Disabled Join Date: Nov 2004 Location: thailand	Cool... I hope that you never forget me Please me too. AHT

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read