Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Hello & Apogee Schematic Needed
Hello & Apogee Schematic Needed
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 15th June 2005, 07:59 PM   #1
DCPreamp is offline DCPreamp  United States
diyAudio Member
DCPreamp's Avatar
Join Date: Jun 2005
Location: Sacramento, CA
Default Hello & Apogee Schematic Needed


This is my first post, so I want to say hello and that I'm impressed with all of the DIY enthusiasm found here. I also enjoy reviewing all of the posts and the variety of skill levels put forth. Having worked in both professional audio, and having been an avid audio hobbyist for almost two decades, I hope to be able to contribute in a positive manor.

Does anyone have schematics for an Apogee DA-800 (or similar DA series) amplifier, or more specifically, the power amp stage? I recently purchased an output power stage for a DA-800 off eBay and would like to avoid the time and effort of reverse-engineering it (though Iím about 20% done). The output stage I bought includes the positive and negative power output stages with class-A drivers and a PCA with the differential input stages and current sources. The output boards use a two-step supply voltage system similar to class-G topology, but Iím not sure if it switches rail voltages based on the load and drive current, or simply runs class-G to reduce heat during ďaverageĒ operation. Itís quite beefy with a forced-air-channel heatsink and enough paralleled output devices to deliver its rated 800WRMS quite easily. I may build it into a dedicated sub-amp for the fun of it. Any help is much appreciated and Iíd be happy to post my project here.

As a side note, I ďacquiredĒ fairly complete sets of schematics for the now defunct Linear Power car audio manufacturer. The schematics are from the 1980s and 1990s and are not to be confused with the current Linear Power products being produced (I must add this little disclaimer as not to upset the near-illiterate person now repairing some Linear products as I donít want to receive their foul-mouthed, incoherent babblings again as I did when I sold some copies on eBay. Iíd be concerned about posting some copies here, but I donít think the cranially-challenged individual who lambasted me could comprehend this site or its/my content). Iíd be happy to trade some for some of the before mentioned Apogee schematics or will simply post some for interested enthusiasts. Some of the DC-DC converter information is interesting, but trust me, the amplifier sections are not very complex or suitable for home use.

  Reply With Quote


Hello & Apogee Schematic NeededHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Schematic needed. sivan_and Everything Else 0 12th August 2009 08:34 AM
BAT VK schematic needed Yarpen Solid State 0 31st March 2007 09:50 AM
AB 600 Schematic needed Burnedfingers Solid State 3 3rd April 2006 10:39 AM
Schematic needed... Quattor Solid State 3 31st August 2005 03:19 PM
schematic needed milos_r Solid State 5 17th January 2005 11:46 AM

New To Site? Need Help?

All times are GMT. The time now is 08:23 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio