Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

single-ended bipolar designs?
single-ended bipolar designs?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 13th May 2005, 07:26 PM   #1
el`Ol is offline el`Ol  Germany
diyAudio Member
Join Date: May 2005
Location: Bavarian Forest
Default single-ended bipolar designs?

When I look into electronic catalogues I see lots of high-power bipolar transistors. Can anybody explain to a valve fan and transistor analphabet why single ended transistor amps always use MOSFets that are limited to 50Watt ?
  Reply With Quote
Old 13th May 2005, 08:22 PM   #2
bcarso is offline bcarso  United States
diyAudio Member RIP
Join Date: May 2005
Location: Canoga Park, California
I suppose, because above a certain level of drain current power MOSFETs have a fairly constant transconductance, whereas bipolars mantain the quasi-exponential characteristic for quite a while. Then there is also the appeal of essentially zero d.c. gate current compared to the substantial bipolar requirement.

There is also the relative freedom from secondary breakdown effects in the FETs.

However, were one to use some of the new parts from On Semi which incorporate local diodes on chip with the big bipolar, it might be practical to use the predistortion technique and linearize the current-to-current transfer function. You won't quite be there with a minimalist circuit since the transistor will be seeing a bunch more volts than the diode (or diode-connected transistor---I'm not sure what is exactly inside the new parts). But at least the thermal coupling is pretty good. If the drive current itself is temperature-compensated then the stage current would be fairly stable as well. Perhaps a cascode structure would be a practical approach, limiting the collector voltage(s) of the initial device and passing the heavy voltage-lifting to the common-base stage---the tempco of alpha is much lower than that of beta.
  Reply With Quote


single-ended bipolar designs?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Single Ended, Single driver: In-room distortion measurements Gerrit Boers Full Range 4 27th November 2007 09:12 AM
DIY Single Ended Triode Designs jesserparker Tubes / Valves 35 23rd March 2004 01:21 AM
Anyone play with the Zen Single-Stage Single-Ended Class A? Rino odorico Pass Labs 13 29th August 2002 10:01 AM
Linkwitz bipolar designs hifiZen Multi-Way 3 17th November 2001 07:49 AM

New To Site? Need Help?

All times are GMT. The time now is 10:38 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio