Power supply for OPA 2134 needed! - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 31st August 2002, 08:11 PM   #1
diyAudio Member
supernet's Avatar
Join Date: Dec 2001
Location: Europe
Default Power supply for OPA 2134 needed!

I am going to build a line preamp for my Super Leach amp and I choose the design from Rod Elliot ( project88) which use opa 2134 from Burr Brown.

So I am searching for clean power supply for this op amp around 317....regulators.


  Reply With Quote
Old 31st August 2002, 09:19 PM   #2
diyAudio Member
Join Date: Mar 2002
Location: South MS
Default Check these out.


There has been quite some discussion of this and similar topics on the board recently. Take a look at the following threads:

Improved LM317 ? and
Fet regulator circuit .

There is very good information in each thread. There were also several other hits when I did a search on this topic.

  Reply With Quote
Old 1st September 2002, 08:47 AM   #3
trwh is offline trwh  United Kingdom
diyAudio Member
trwh's Avatar
Join Date: Apr 2002
Location: UK

Should sound fine.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
B&K microphone power supply - help needed TheoM Power Supplies 83 22nd February 2017 01:27 PM
soundwise, which one opa 2132P or 2134 opinions needed crippledchicken Solid State 6 29th August 2008 04:23 PM
Power supply choke help needed audiobliss Tubes / Valves 4 1st August 2008 03:22 PM
dc power supply help needed skullkeeper Parts 12 12th May 2008 11:49 PM
Turntable Power Supply DIY needed promitheus Analogue Source 14 21st August 2006 12:02 PM

New To Site? Need Help?

All times are GMT. The time now is 08:04 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2