av400 VS. super leach amp

raszvan · 2nd May 2005, 09:01 PM

raszvan · 4th May 2005, 07:59 PM

some opinions pls....

witch one?

Stocker · 4th May 2005, 10:33 PM

In MY opinion, you need to ask a question before you ever can get an answer.

If you are asking which one wins in a fist fight, then I go for the av400 because the number is so big in the name of the amplifier. Seriously,

Try again, please.

Killjoy99 · 4th May 2005, 10:56 PM

You may have your heart set on one of the two amps you listed in the title but the high power version of Rods P101 is a comparabale design. Many of the specs are right up there with the AV400 such as the rail voltage at +-70 and output at around 180 RMS into 4 ohm. Just my two cents worth.

Brian

still4given · 5th May 2005, 12:31 AM

Quote:

Originally posted by Killjoy99
You may have your heart set on one of the two amps you listed in the title but the high power version of Rods P101 is a comparabale design. Many of the specs are right up there with the AV400 such as the rail voltage at +-70 and output at around 180 RMS into 4 ohm. Just my two cents worth.

Brian

Actually, his website states

Quote:

With the full supply voltage of +/-70V (which must not be exceeded!), RMS power is around 180W into 8 ohms, or 250W into 4ohms. Short term (or "music") power is typically about 240W into 8 ohms and 380W into 4 ohms. Note that depends to a very great degree on the power supply, and a very robust supply is an absolute requirement for the maximum output."

This is a very good sounding amp and fairly easy to build. It was my first amp.

Blessings, Terry

Killjoy99 · 5th May 2005, 01:10 AM

Thanks Terry, I typed the RMS spec wrong. It's 180 into 8 ohms as stated in the quote above.

Brian

2nd May 2005, 09:01 PM	#1
raszvan diyAudio Member Join Date: Apr 2005 Location: bucharest	av400 VS. super leach amp av400 VS. super leach amp

4th May 2005, 10:33 PM	#3
Stocker diyAudio Member Join Date: Dec 2003 Location: Austin	In MY opinion, you need to ask a question before you ever can get an answer. If you are asking which one wins in a fist fight, then I go for the av400 because the number is so big in the name of the amplifier. Seriously, Try again, please. __________________ Jesus loves you.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High Current Leach/leach super amp	bowdown	Solid State	41	2nd March 2011 02:15 PM
Leach Super Amp HELP ...	Ahmad_tbp	Solid State	22	28th December 2009 05:44 AM
leach super amp with +/- 78V	lenti	Solid State	1	21st July 2002 03:00 PM
I need some help with super Leach amp!	supernet	Solid State	5	22nd April 2002 09:27 PM
Leach amp vs super Leach amp	supernet	Solid State	0	21st February 2002 10:16 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th May 2005, 07:59 PM	#2
raszvan diyAudio Member Join Date: Apr 2005 Location: bucharest	some opinions pls.... witch one?

4th May 2005, 10:56 PM	#4
Killjoy99 diyAudio Member Join Date: Dec 2003 Location: Seattle, WA	You may have your heart set on one of the two amps you listed in the title but the high power version of Rods P101 is a comparabale design. Many of the specs are right up there with the AV400 such as the rail voltage at +-70 and output at around 180 RMS into 4 ohm. Just my two cents worth. Brian

5th May 2005, 01:10 AM	#6
Killjoy99 diyAudio Member Join Date: Dec 2003 Location: Seattle, WA	Thanks Terry, I typed the RMS spec wrong. It's 180 into 8 ohms as stated in the quote above. Brian

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)