Sugden C51 and P51

tubenut · 26th April 2005, 07:23 PM

I have been asked to fit a pair of RCA sockets on the outputs of a Sugden C51 pre amp and the inputs of a P51 power amp. It comes standard with 5 pin DIN sockets.

Anyone know which pins are left and right signal and earth on these two classics?

Leolabs · 27th April 2005, 02:09 AM

Looks like u need some sorts of signal generator or audio test CD to find out

planet10 · 27th April 2005, 02:48 AM

It should be pretty easy to figure out... i'd guess there is probably a standard -- i could read the pinout off my NAIM NAIT if you'd like to use that as a starting point.

An email to Sugden might also do it.

dave

Geoff · 27th April 2005, 08:45 AM

Tubenut

email me and I will send you details of the P51 input socket.

Geoff

26th April 2005, 07:23 PM	#1
tubenut diyAudio Member Join Date: Nov 2002 Location: South Africa, Jhb	Sugden C51 and P51 I have been asked to fit a pair of RCA sockets on the outputs of a Sugden C51 pre amp and the inputs of a P51 power amp. It comes standard with 5 pin DIN sockets. Anyone know which pins are left and right signal and earth on these two classics?

27th April 2005, 02:48 AM	#3
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 4	It should be pretty easy to figure out... i'd guess there is probably a standard -- i could read the pinout off my NAIM NAIT if you'd like to use that as a starting point. An email to Sugden might also do it. dave __________________ community sites t-linespeakers.org, frugal-horn.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sugden P28	DaveC	Solid State	128	28th May 2012 04:43 AM
Sugden A28 II schématic ?	v6us	Solid State	10	12th June 2011 10:36 PM
Sugden A28B	Sjaak	Everything Else	0	15th November 2008 11:51 AM
Need help with Sugden A-51	champybuddy	Solid State	3	18th February 2008 04:04 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th April 2005, 02:09 AM	#2
Leolabs diyAudio Member Join Date: Dec 2004 Location: Bukit Mertajam	Looks like u need some sorts of signal generator or audio test CD to find out

27th April 2005, 08:45 AM	#4
Geoff diyAudio Member Join Date: Apr 2001 Location: UK	Tubenut email me and I will send you details of the P51 input socket. Geoff

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)