diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Sugden C51 and P51 (http://www.diyaudio.com/forums/solid-state/56146-sugden-c51-p51.html)

tubenut 26th April 2005 07:23 PM

Sugden C51 and P51
 
I have been asked to fit a pair of RCA sockets on the outputs of a Sugden C51 pre amp and the inputs of a P51 power amp. It comes standard with 5 pin DIN sockets.

Anyone know which pins are left and right signal and earth on these two classics?

Leolabs 27th April 2005 02:09 AM

Looks like u need some sorts of signal generator or audio test CD to find out

planet10 27th April 2005 02:48 AM

It should be pretty easy to figure out... i'd guess there is probably a standard -- i could read the pinout off my NAIM NAIT if you'd like to use that as a starting point.

An email to Sugden might also do it.

dave

Geoff 27th April 2005 08:45 AM

Tubenut

email me and I will send you details of the P51 input socket.

Geoff


All times are GMT. The time now is 04:42 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2