|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
18th April 2005, 09:51 PM
|
#1 |
|
diyAudio Member
Join Date: Mar 2005
Location: Canada
|
Finished my optimos amp!
I have finally finished my amplifier after $800 and two years (one year I just sat on my rear).
Other than the amplifier board which I couldn't make myself due to the design being double sided, I started everything from scratch (minus case). The amplifier was designed by Randy Slone, it utilizes 2SK1058/2SJ162 Lateral mosfets. 140W rms -3dB frequency response is excellent 3Hz~140KHz, distortion is below 0.003% across the audio spectrum and exhibits soft clipping when overdriven. More important than the above mentioned mumbo jumbo is that it sounds good to me. pictures at http://members.shaw.ca/joonyoung |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| noise problems with an OptiMOS | sinigersky | Solid State | 10 | 19th August 2011 04:26 AM |
| PICS: "Optimos" 140W Monoblock Amps! | Rarkov | Solid State | 50 | 28th April 2011 01:54 PM |
| Randy Slone's Optimos power amp demo Sydney Sunday Nov 9 2008 | HiFiNutNut | Solid State | 17 | 2nd September 2009 08:15 AM |
| OPTIMOS-Amp from Randy Slone | wopo | Solid State | 1 | 12th July 2004 08:18 PM |
| New To Site? | Need Help? |
