I'm not sure what the difference is between the Doxa 70 models, but if possible go for the Doxa 70 Signature. This is the most expensive of the 3 amp's. It would be interesting to know the exact differences too.
To my knowledge there are different versions too. The last version of 70 Signature has better bass control.
To my knowledge there are different versions too. The last version of 70 Signature has better bass control.
Doxa 70
Hi There!
Did You get scematics? (If not i have it)
Do You or anyone know what BIAS current normally is on a Doxa 70? On my Doxa 70 i measure 3,5mV over emitter res.(After 1/2 Hour,without any load)
Emitter res is 2 x 1R in parallell giving me around 7mA!!.
Please advice me as i need to know
Hi There!
Did You get scematics? (If not i have it)
Do You or anyone know what BIAS current normally is on a Doxa 70? On my Doxa 70 i measure 3,5mV over emitter res.(After 1/2 Hour,without any load)
Emitter res is 2 x 1R in parallell giving me around 7mA!!.
Please advice me as i need to know
Re: Doxa 70
Hello
Thank you so much
Very nice with amplifier pictures included in the mail
ManUtd said:Hi There!
Did You get scematics? (If not i have it)
Hello
Thank you so much
Very nice with amplifier pictures included in the mail
Do some off you have a schematic for Rega Exon 3??
Look here:
http://www.rega.co.uk/html/exon.htm
Kim
Look here:
http://www.rega.co.uk/html/exon.htm
Kim
Thanks to kimschips you can get some DOXA schematics at my website: www.audio-circuit.dk
Just click on "Schematics" in the left side menu.
Thanks a lot, Kim
Just click on "Schematics" in the left side menu.
Thanks a lot, Kim
Roar Malmin said:The schematics should only be taken as guidelines, as there are some discrepancies in the schematics. The poweramp will not work as drawn.
Which of them will not work and why not?
schematic clarification
do you know what should be the output on the transformer? 32V AC? also I would like to know What each T(*) means as a connection. There is also a missing connection on the right between Q26 and R49. And a floating connection D6, D10, E3, E4( is that ground?
thank you,
Cristian
do you know what should be the output on the transformer? 32V AC? also I would like to know What each T(*) means as a connection. There is also a missing connection on the right between Q26 and R49. And a floating connection D6, D10, E3, E4( is that ground?
thank you,
Cristian
- Home
- Amplifiers
- Solid State
- Doxa 70 Se Schematic??