I have the smallest amplifier in the Atoll Electronique range, the IN50. I love it's fluid and dynamic sound but i want to do some mods.
I want to upgade it by adding two BC/Philips caps of 6800 mF/63V that are missing from the board.
My question is : by adding the 2 missing caps i will get more power and a bit more stable soundstage? Worth to try?
Also, the BC caps are 2222056/7 Series, that's right?
Thanx so much !
I want to upgade it by adding two BC/Philips caps of 6800 mF/63V that are missing from the board.
My question is : by adding the 2 missing caps i will get more power and a bit more stable soundstage? Worth to try?
Also, the BC caps are 2222056/7 Series, that's right?
Thanx so much !
10 years ago - no informations in the meantime ???
Who can upload schematics and circuit descriptions (maybe from french members) ?
Are there any special features in the front end and the output buffer stage ?
at post 6 under
http://www.head-fi.org/t/54317/stereophile-recommended-components-integrated
it was mentioned, Atoll's model IN 100 works in class C.
Thank you for advices and URLs.
Who can upload schematics and circuit descriptions (maybe from french members) ?
Are there any special features in the front end and the output buffer stage ?
at post 6 under
http://www.head-fi.org/t/54317/stereophile-recommended-components-integrated
it was mentioned, Atoll's model IN 100 works in class C.
Thank you for advices and URLs.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.