|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
2nd March 2005, 10:01 PM
|
#1 |
|
diyAudio Member
Join Date: Feb 2002
Location: Nantes
|
Chokes loads
Hello,
I want to build an output stage with two mosfets in source follower operation in a balanced topology. I would like to build two big air-chokes (something like 50mH each) and connect them in the source of each mosfet as current source. (efficiency increased) Is it better to : -make two big air-chokes and in this case what would be the interference from one on the second according to their position in the amp-case. -make a (very) big dual air-chokes and connect them in opposite way. Thanks |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Plate chokes & Power chokes | JC951t | Tubes / Valves | 3 | 19th October 2006 03:18 PM |
| Choke loads for SOZ | Magura | Pass Labs | 34 | 17th November 2004 04:29 PM |
| Now what, each page loads twice. | Bill Fitzpatrick | Forum Problems | 3 | 11th September 2004 09:16 AM |
| GainClones & 4 Ohm Loads | SRMcGee | Chip Amps | 5 | 9th August 2004 11:56 PM |
| using 2 ohm loads on leach amp | Wagener | Solid State | 4 | 1st April 2004 07:02 AM |
| New To Site? | Need Help? |
