diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   3W Pure Class-A AMP (http://www.diyaudio.com/forums/solid-state/49927-3w-pure-class-amp.html)

DarkHorse 20th January 2005 07:26 AM

3W Pure Class-A AMP
 
2 Attachment(s)
I design this Circuit Lastyear(2004)...
But Mr.Pass(Nelson Pass)had work it out as preamp in 1996...
God..
:smash:
Ok,let's see the Circuit:

DarkHorse 20th January 2005 08:33 AM

per channel power waste about 52Watte,
Output 3.25W(6ohm load)!!!
:bawling:

Upupa Epops 20th January 2005 09:04 AM

What do you waiting from this connection ? :D

DarkHorse 20th January 2005 11:04 AM

:clown:
yes,I'm a new comer of diyaudio...
what do you think of this circuit?
I want to build one of this amp...
but short of some compenents...WoWo:smash:

Upupa Epops 20th January 2005 11:09 AM

If you are newcomer, all is OK ;) - I wish you best results and many enjoy with it :cool: .

DarkHorse 20th January 2005 11:35 AM

Thank you,Mr.Upupa Epops
about 1 or 2 month later,I will show This AMP to you all..
it's so simple and easy to do,but need very large heatsink..
and high power transformer..;)

PMA 21st January 2005 10:58 AM

Nice design ;) . Please let us know your listening impressions. Maybe you are losing a little bit more power than necessary ;)

Circlotron 21st January 2005 12:16 PM

Darkhorse, this is one I made about 2- 1/2 years ago and is still going well. It uses a big choke instead of a resistor and so it has half the power loss than usual.

Circuit. http://www.diyaudio.com/forums/attac...amp=1054194645

The complete thread.
http://www.diyaudio.com/forums/showt...=&pagenumber=1

DarkHorse 22nd January 2005 01:16 AM

Quote:

Originally posted by PMA
Nice design ;) . Please let us know your listening impressions. Maybe you are losing a little bit more power than necessary ;)
hi,PMA:
the amp didn't work out yet!But trying my best now--buying electric device and its out shell ..etc
I hope the circuit will sounds good,my friend told me that can it compare with 2A3 vacuum tube amp..
in fact,I don't own both of them now..haha
same as you expect,I doing things for it!
have fun!


Quote:

Originally posted by Circlotron
Darkhorse, this is one I made about 2- 1/2 years ago and is still going well. It uses a big choke instead of a resistor and so it has half the power loss than usual.

Circuit. http://www.diyaudio.com/forums/attac...amp=1054194645

The complete thread.
http://www.diyaudio.com/forums/showt...=&pagenumber=1

hello,Circlotron:
I read your post thread "My first ever Class A amp",we almost have same idea of class-a amp form,yours is using inductance winding,the efficiency near to 50%...High!I saw the same idea in passlab.com, nelson pass new design zen-7,good idea..
but the high quality inductance is hard to DIY or buying!is it?
I don't want to change my mind-Use aluminium case power resistance,only this I can choose for this circuit..
and I hope it will sounds truly..
happy!

DarkHorse 22nd January 2005 01:24 AM

2 Attachment(s)
I have make some change with the circuit..
now it don't need regulated power supply..
more high voltage supply,burning 67watte to get 4watte(RMS) output power!just like SOZ's hot..
see the update schematic diagram:
:smash:


All times are GMT. The time now is 09:41 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2