diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Harman Kardon HK-6900 (http://www.diyaudio.com/forums/solid-state/49901-harman-kardon-hk-6900-a.html)

ManUtd 19th January 2005 06:54 PM

Harman Kardon HK-6900
 
Hi there!

Anyone got a Service Manual for this Old goodie?

Regards,
ManUtd.

bvp9223 19th January 2005 08:15 PM

Here it is. Good luck

bvp9223 19th January 2005 08:18 PM

Sorry man.
The file size is too big so it couldn't go through. Please email me at : bvp9223@hotmail.com, I'll send you the pdf file (approx 5M)

destroyer X 19th January 2005 08:35 PM

Here is the adress, if you prefer to see others, not only your 6900
 
The HK-6900 Service Manual is here:

http://schforfree.seedhost.com/archi...ers-Integrated

He is our forum friend.

regards,

Carlos

destroyer X 19th January 2005 08:39 PM

His site is very good, and free to download 10 Megabytes of data
 
2 Attachment(s)
Here is the image:

Only the Harman Kardon part, or Products, and Integrated Amplifiers...but this is not more than 2 percent of all he has in that site.

regards,

Carlos

ManUtd 19th January 2005 09:29 PM

Re: Here is the adress, if you prefer to see others, not only your 6900
 
Quote:

Originally posted by destroyer X
The HK-6900 Service Manual is here:

http://schforfree.seedhost.com/archi...ers-Integrated

He is our forum friend.

regards,

Carlos


THAT`S GREAT CARLOS!!

Thank`s a lot for helping me.
Now i will look forward to receive my "New" amplifier this
weekend.I buyed a used one for 100$ with one channel not working.I heard this amplifier is good.
Anyone who listened to it?
Thanks Again,

regards,
Man Utd.

destroyer X 20th January 2005 07:51 AM

hahaha, this is great!..a big emotion to us those new toys to big children we are,...
 
Have you already bougth some soft brush to clean it?

hehe, some silicone oil.... some WD40 pressurized thin oil....this is wonderfull.

That brand normally produce good sound, some people say that distort a little in the high frequencies when over driven...so.....only do not go to maximum...stay around 75 percent and you will be happy, and no one will say nothing against your new piece of jewellery.

The pleasure, when i can help, is all mine, if you smile, pleasure is double, saying thanks turns triple.

regards,

Carlos

DcibeL 14th August 2012 05:11 PM

I know this is a super old thread but just wanted to chime in and say that I picked up a broken HK6900 for $20. Found a crack in the tone control PCB and a blown resistor in the positive supply for the tone controls. Fixed for the low low price of $0.50, and what a nice amplifier this is. Doesn't look like much on the outside, but is very impressive on the inside. My only complaint is that it makes a fair bit of heat at idle, and is quite difficult to disassemble. I adjusted idle current as per the service manual, manual stated to set it to 52mV, mine was down to 30mV.

Very impressive unit, I'm impressed and very happy I got it for only $20! :)


All times are GMT. The time now is 03:31 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2