ACTIVE XOVER

KIERANPHILLIPS · 30th July 2001, 10:14 PM

I am gathering data and advice on active xovers.I have been to a few sites and here is my current plan..

Seperate P.S.U (flat cap design)

either 12decibel/octave or 24

This bit will cause some reaction.......

Royd conn R's or Tannoy M1's????

The speakers are the only ones I have and one of them is to be used.

Through ideas at me and I will responed.(web sites)

Kieran

paulb · 31st July 2001, 01:05 PM

I'm about to build one using the ESP project 9 (Linkwitz-Riley 24 dB/octave). See http://www.sound.au.com

Simon · 31st July 2001, 11:04 PM

Whilst you're at the ESP site, check out the links page... Specifically http://www.linkwitzlab.com

Simon

ALW · 1st August 2001, 09:31 PM

Kieran,

You mentioned a flat cap PSU design - do i take it you mean flatcap as in Naim?

Are you using the corssover with Naim amps, as they need some careful signal conditioning to maintain stability.

I can provide more info if this is the case.

Andy.

KIERANPHILLIPS · 20th August 2001, 07:29 PM

Andy,

Yes it is Naim amps I will be using.
I would be greatfull for any help.
Kieran

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: 2 way active xover	MarkHathaway	Swap Meet	0	21st September 2008 09:31 AM
Behringer DCX2496 I want to try active biamping using it as the active xover.	georgehifi	Digital Line Level	3	15th August 2006 07:46 AM
active AD/DA xover as RIAA-amp?	miksin	Digital Source	14	15th July 2005 12:43 AM
Active xover help!	led_zeppelin	Solid State	8	28th September 2004 02:14 PM
active xover	5th element	Solid State	0	9th March 2003 07:19 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

30th July 2001, 10:14 PM	#1
KIERANPHILLIPS diyAudio Member Join Date: Jul 2001 Location: CHESHIRE (UK)	I am gathering data and advice on active xovers.I have been to a few sites and here is my current plan.. Seperate P.S.U (flat cap design) either 12decibel/octave or 24 This bit will cause some reaction....... Royd conn R's or Tannoy M1's???? The speakers are the only ones I have and one of them is to be used. Through ideas at me and I will responed.(web sites) Kieran

31st July 2001, 01:05 PM	#2
paulb diyAudio Member Join Date: Jun 2001 Location: Calgary	I'm about to build one using the ESP project 9 (Linkwitz-Riley 24 dB/octave). See http://www.sound.au.com

31st July 2001, 11:04 PM	#3
Simon diyAudio Member Join Date: Jun 2001 Location: Kent, UK	Whilst you're at the ESP site, check out the links page... Specifically http://www.linkwitzlab.com Simon

1st August 2001, 09:31 PM	#4
ALW diyAudio Member Join Date: Jun 2001 Location: UK	Kieran, You mentioned a flat cap PSU design - do i take it you mean flatcap as in Naim? Are you using the corssover with Naim amps, as they need some careful signal conditioning to maintain stability. I can provide more info if this is the case. Andy.

20th August 2001, 07:29 PM	#5
KIERANPHILLIPS diyAudio Member Join Date: Jul 2001 Location: CHESHIRE (UK)	Andy, Yes it is Naim amps I will be using. I would be greatfull for any help. Kieran

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)