subwoofer amp

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
S

sidd_raj2002

Member
Joined 2004
heloo i am new to diy.

can any one please send me a schematic and pcb layout for a cheap,easy but reliable subwoofer amplifier to drive two subwoofers i built with a pair of local drivers (6ohms each connected in parallel)

it should be atleast 30-80 watts and mono with built in low pass.

in short should be ideal 4 a sub.

but please remember i am 17 yrs old so dont send something expensive and complicated with 2-3 pcbs at a time.

keep it as simple as possible.
 
mpmarino

mpmarino

Member
Joined 2004
I plan on trying this in the future... looks like you can make as much power into any load you want..very scalable. It's not the simplest but I'd bet if you I/you got the hang of it, I/you could build an ideal sub/hi pwr amp for any occasion.

http://www.diyaudio.com/forums/showthread.php?s=&threadid=40065

The citation 12 circuits are pretty simple too....

edit..
oops, no low pass on either...
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom