J-FET preamp/DI vs tubes - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th December 2004, 12:04 AM   #1
qveda is offline qveda  United States
diyAudio Member
 
Join Date: Dec 2004
Location: Oregon
Default J-FET preamp/DI vs tubes

I'll start off by saying I'm not super techy. But thought you guys could help me understand how J-Fet preamps could offer advantages over tube preamps or other solid state preamps for use with elec.guitar and bass ( pre/DI application)

Some high quality pre/DI's boast the use of J-Fet to get a variety of warm harmonically rich tones by adjusting gain. (e.g. I think Neve consoles, and Universal Audio 2108 uses J-Fet, and maybe these less expensive products do too: Presonus Eureka, and Joe Meek products).

I have not had the opportunity to play though these. Can you offer comparison between J-Fet , other solid-state , and tube preamps?

Can J-Fet preamps offer a variety harmonically rich overtones by adjusting gain settings? like tubes can?

What are some advantages of J-Fet over tubes? warmth plus greater clarity?

When I read the blurbs for products, should I watch specifically for J-FET vs. FET ? is there a big difference ? or are these terms sometimes used interchangably?

thanks! and happy holidays
-Qua
  Reply With Quote
Old 25th December 2004, 12:58 AM   #2
anatech is offline anatech  Canada
diyAudio Moderator
 
anatech's Avatar
 
Join Date: Jun 2004
Location: Georgetown, On
Hi Qua,
The best thing to do is go into a music store and play around with these. I am inclined to think the J fet is most often used. It's more robust in that enviroment. I know the older IG fets were noisier than J fets. Distortion quality depends on the design of the unit. Don't expect them to behave exactly like tubes.
-Chris
  Reply With Quote
Old 30th December 2004, 05:05 AM   #3
Enzo is offline Enzo  United States
diyAudio Member
 
Join Date: Sep 2004
Location: Lansing, Michigan
Keep in mind that mixers and mic pres are fundamentally different from guitar amps. The mixer tries to reproduce faithfully what comes into it. It wants to be completely neutral and lacking in coloration. Even when adding "warmth" the thing is just adding a subtle EQ change. But guitar amps are part of the instrument. They are meant to be anything BUT clear and faithful. You are now PRODUCING sound rather than reproducing it. SO what Neve does is unrelated to what Fender does.

If you are preamping an acoustic guitar, then you are not really using a guitar amp, "acoustic" amps are really small PA systems.

I know there are guitar amps using FETs, but I can't recall any specifically right now. JFETS do operate analogously to tubes, but as CHris said, they won't sound like them. Please do experiment though and share your findings.

One real advantage of JFETs over tubes is that you can run them off a 9v battery
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Building a preamp - somewhat new to tubes jscherer Tubes / Valves 3 19th February 2009 03:21 AM
Zen V8-like Preamp using Tubes needtubes Pass Labs 1 18th August 2006 07:25 AM
Tubes as preamp.. Ryssen Car Audio 9 25th July 2006 05:34 PM
preamp tubes change mongiak Tubes / Valves 3 19th August 2005 05:44 PM
What tubes are best for preamp? ronjg Tubes / Valves 7 31st May 2002 11:36 AM


New To Site? Need Help?

All times are GMT. The time now is 09:57 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2