Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

have anyone make amp using this...
have anyone make amp using this...
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 15th July 2001, 08:42 PM   #1
partyjups is offline partyjups
diyAudio Member
Join Date: May 2001
Location: Denmark

I just looked at nationals home page a see this
I was thinking if it coud perform very well for sub woofer amp (bridge mode) for a low cost power amp solution.

any comments and idears are welcome JC.
  Reply With Quote
Old 15th July 2001, 09:31 PM   #2
Thoth is offline Thoth
diyAudio Member
Join Date: May 2001
Interesting idea. I checked the specs, and found that the distortion isn't too bad, but it climbs rapidly as the voltage drops. This is probably due to crossover distortion.

As for using it as a power amp for a sub, you'll need an 8-ohm load, if you want to run in bridge mode, otherwise, you'll current-limit. Unfortunately, many subs are 4-ohm loads.

Finally, Allied Electronics has these in-stock (not in their current catalog), but the price is $40 each. I would expect the power supply section (+/-40v@13A) to cost at least $100 plus heatsinks and chassis. For this price, I think you can do better.

Check out http://www.parts-express.com/, and do a search for 'subwoofer amplifier' (keyword quicksearch).

Good luck.
  Reply With Quote


have anyone make amp using this...Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Make it worse to make it better??? moray james Planars & Exotics 23 12th May 2008 11:08 AM
What to make? Mayday Tubes / Valves 3 5th December 2006 03:20 AM
Make ac dc. Jasmeleg Parts 12 12th September 2005 06:14 PM
How make make a microchip, from a program? multiplexor Everything Else 1 20th February 2004 01:24 PM

New To Site? Need Help?

All times are GMT. The time now is 09:46 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio