Classification Mess Up - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th November 2004, 04:14 PM   #1
freedom is offline freedom  Denmark
diyAudio Member
 
Join Date: Nov 2004
Location: Broenderslev Denmark
Send a message via MSN to freedom
Question Classification Mess Up

Dear All.

Hope you can help me out here.

At University of Aalborg numerous studentgroups are building class AB amps. Most of us need to explain the other classes commonly used for audio.

Now, according to posts and articles in this forum class G is the class where 2 or more sets of output transistors are placed "on top of each other" with different levels of DC-voltage

Class H is 1 set of output transistors (fx. 5 NPN and 5 PNP - could be any number) but here the supply voltage is raised as needed.


It happens so that i agree with the above mentioned classification. Along other brands, QSC-audio agrees with me. However this homepage and at least one book containing amplifier theory (havenīt recieved author and title yet but will post it) states otherwise.

http://www.wordiq.com/definition/Ele...lifier#Class_G


In general: What do you think is Class G and what is Class H?




Sorry if this topic has been discussed before - i havenīt been able to find it.

Thanks for your time

Hans-Henning / Denmark
__________________
If you cannot measure it - you cannot improve it!
  Reply With Quote
Old 15th November 2004, 05:08 PM   #2
Mr Evil is offline Mr Evil  United Kingdom
diyAudio Member
 
Join Date: Aug 2004
Location: Behind you
I agree with the definitions in the link. Class G switches between two or more supply voltages to keep power dissipation in the output devices at a minimum. Class H is the same except it varies the supply voltage smoothly. What you describe is a variation of class G where the second pair of output transistors handles the higher rails.

You find some disagreement over the exact definition because they aren't official classifications.
__________________
https://mrevil.asvachin.eu/
  Reply With Quote
Old 15th November 2004, 05:32 PM   #3
diyAudio Member
 
Jan Dupont's Avatar
 
Join Date: Apr 2003
Location: Copenhagen, Denmark
Send a message via MSN to Jan Dupont
Just to make things more clear or confusing

http://www.crownaudio.com/pdf/amps/grbgpapr.pdf
__________________
Free Schematic and Service Manual downloads www.audio-circuit.dk, Company: www.dupont-audio.com, Joint venture: www.DupontMantra.com
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
RB250 Rewiring - accidental mess up? InfiniteGain Analogue Source 5 30th January 2009 11:11 PM
Help Please Guitar Project Mess Trout Tubes / Valves 7 15th September 2005 04:45 AM
Stage classification and efficiency eeka chu Tubes / Valves 11 12th December 2004 07:18 PM
Do crossover points really mess things up? BAM Multi-Way 3 2nd June 2002 06:57 AM


New To Site? Need Help?

All times are GMT. The time now is 11:39 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright Đ1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2