|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
1st November 2004, 02:57 PM
|
#1 |
|
diyAudio Member
Join Date: Jun 2004
Location: Copenhagen
|
Krell KRC-3
Hi
Just back to Europe after a couple of years in the US and have brought my Krell KRC-3 back with me. Inside there are switched that allows you to switch from 110V to 240V and I have done that - However I am unable to select any inputs on the unit. The unit does power up (there is at least light in the blue center diode) and it was my impression that only units after 1998 had the freq sensor that would block the unit if it sensed 50 vs 60 Hz. Do anyone have any ideas? |
|
|
| Thread Tools | Search this Thread |
|
|
| New To Site? | Need Help? |
