diyAudio (
-   Solid State (
-   -   Three Way Attentunating Switch on -10db line level (

Parker_SMC 12th October 2004 09:44 PM

Three Way Attentunating Switch on -10db line level
I would like to put a 3 way resistance switch across a -10db line level audio signal before it goes into an amplifier.

I don't want a preamp or a rotary volume control.

Is it possible to put resistors on a 3 way toggle switch so that I have a low/med/high control switch on the line level? Even high would still offer some resistance as I don't want to open the amplifier up to a full signal. Hi would probably be 70% of max.

If this kind of switch is possible, what resistors would I use?

Can I use the same resistor in series to double/triple the attenuation?



lucpes 19th October 2004 09:02 PM

Do a search here or Google for 'passive preamplifier'.

All times are GMT. The time now is 08:05 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2