Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Repairing an old McIntosh : Part II
Repairing an old McIntosh : Part II
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 3rd January 2001, 03:21 AM   #1
namui is offline namui
diyAudio Member
 
Join Date: Nov 2000
Thanks for a few replies on my last question. Since the last problem is occasional and therefore difficult to really locate, and I've tested a few things as suggested, I've decided to replace the filter caps and if the problem still remains, I'll replace the output transistors.
There is another problem, though. Once turned on, there is a tik-tik-tik.... sound coming out of the tweeter of both channel, loud enough to barely hear from about 2 feet away. This also causes the VU-meter (almost all solid-state Mc's have this meter) to continuously bounce slightly. Its sound is similar to alternately tapping the nails of our two fingers on the desk as fast as we can.
I've tried paralleling each filter diode with a small cap, but it didn't work. Any suggestion ?
  Reply With Quote
Old 5th January 2001, 12:29 AM   #2
robertpear is offline robertpear
diyAudio Member
 
Join Date: Jan 2001
Location: Lawrence, Kansas
Replace the fliter caps in the low voltage section to. Your low level tic is proably a slow oscilation cause by the power supply having poor output impeadance caused usally by the filter caps being open or leaky.
__________________
Bob P
  Reply With Quote
Old 5th February 2001, 12:16 PM   #3
djk is offline djk
diyAudio Member
 
djk's Avatar
 
Join Date: Feb 2001
Location: USA
The sound fading out and the power guard light turning red is probably the cap in the feedback loop to ground going open.I own two MC2120.The same as yours less the meters.
  Reply With Quote

Reply


Repairing an old McIntosh : Part IIHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
what part can take the place of ST part VB408B completely peterchen88 Parts 0 8th September 2007 05:45 AM
part# for spare part for CDM-1 wanted joe Digital Source 5 20th March 2007 07:59 AM
Repairing an old McIntosh namui Solid State 3 4th May 2005 12:35 PM
Repairing Mcintosh MC2300 diyman Solid State 0 12th August 2004 11:13 AM
Mcintosh C26 bonsai171 Solid State 2 8th May 2004 02:58 PM


New To Site? Need Help?

All times are GMT. The time now is 03:24 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki