MJE350 orcad model

djdamix · 21st September 2004, 08:34 AM

I'm looking for a MJE350 orcad model (it's for my VAS stage). If somebody could send me this model.

Thanks.

Have a nice day
David

JensRasmussen · 21st September 2004, 08:38 AM

Try looking at www.onsemi.com

\Jens

djdamix · 21st September 2004, 08:43 AM

thanks, but

I've tried it, but none of the format available seems to work with orcad. The message is always something like "library not valid"

David

Hoffmeyer · 21st September 2004, 12:53 PM

Hi djdamix.

My guess is that You're using an older version of PSpice/Orcad, not compatible with the newer library format !
Try an upgrade ;o)

Konrad · 21st September 2004, 05:42 PM

Modell is on this page : http://www.onsemi.com/site/support/l...outputSize=50&
http://www.onsemi.com/pub/Collateral/MJE350.LIB
use Mje 350.lib save to a folder/place.

This is not the prefered way, but will work: edit somthing you newer use, or make new component is prefered:
place like mje 42 in ure drawing. right click and press edit spice modell. Then all parameters for the mje42 coms up.
open the mje350.lib with like notepad compare and edit the mje42. afterwards save the edited mje 42 as prefered in prefered...

there ia a lot of ways to do editing in orcad. orcad video demos is also somwere on the www.

good luck

edit: if you'r using separate spice lib remember to add it to the libraries where you edit pspice profile.

djdamix · 22nd September 2004, 06:49 AM

ok, I'll try that, thanks a lot !

Have a nice day

David

Konrad · 22nd September 2004, 08:01 AM

Have you tryed downloading models from the orcad site?
Bouth .lib and .olb 's are available, So why bother just download and replace/add ur libs ?
http://www.orcadpcb.com/pspice/models.asp?bc=F

djdamix · 22nd September 2004, 08:10 AM

ok, thanks a lot for the link , my lib where not up to date ...

21st September 2004, 08:34 AM	#1
djdamix diyAudio Member Join Date: Jun 2004 Location: Lyon	MJE350 orcad model I'm looking for a MJE350 orcad model (it's for my VAS stage). If somebody could send me this model. Thanks. Have a nice day David

21st September 2004, 12:53 PM	#4
Hoffmeyer diyAudio Member Join Date: Dec 2000 Location: Önnarp, Söderslätt	Hi djdamix. My guess is that You're using an older version of PSpice/Orcad, not compatible with the newer library format ! Try an upgrade ;o) __________________ Regards Hoffmeyer ;0)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Model For Pspice, cadence and Orcad	juanlara	Parts	0	8th April 2009 08:54 AM
NE5532 Orcad/PSpice Model	thorin92	Parts	2	12th May 2008 08:54 AM
MJE340 and MJE350 in VAS stage	rtarbell	Parts	4	9th June 2006 03:53 PM
MJE350 pinout and ccs issue	dsavitsk	Tubes / Valves	9	10th February 2006 07:12 AM
MJE340 MJE350 detalied data, more than the datasheet	peranders	Parts	9	16th November 2002 05:47 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st September 2004, 08:38 AM	#2
JensRasmussen diyAudio Member Join Date: Jul 2002 Location: Denmark - Jutland	Try looking at www.onsemi.com \Jens

21st September 2004, 08:43 AM	#3
djdamix diyAudio Member Join Date: Jun 2004 Location: Lyon	thanks, but I've tried it, but none of the format available seems to work with orcad. The message is always something like "library not valid" David

21st September 2004, 05:42 PM	#5
Konrad diyAudio Member Join Date: Jun 2003 Location: way up north	Modell is on this page : http://www.onsemi.com/site/support/l...outputSize=50& http://www.onsemi.com/pub/Collateral/MJE350.LIB use Mje 350.lib save to a folder/place. This is not the prefered way, but will work: edit somthing you newer use, or make new component is prefered: place like mje 42 in ure drawing. right click and press edit spice modell. Then all parameters for the mje42 coms up. open the mje350.lib with like notepad compare and edit the mje42. afterwards save the edited mje 42 as prefered in prefered... there ia a lot of ways to do editing in orcad. orcad video demos is also somwere on the www. good luck edit: if you'r using separate spice lib remember to add it to the libraries where you edit pspice profile.

22nd September 2004, 06:49 AM	#6
djdamix diyAudio Member Join Date: Jun 2004 Location: Lyon	ok, I'll try that, thanks a lot ! Have a nice day David

22nd September 2004, 08:01 AM	#7
Konrad diyAudio Member Join Date: Jun 2003 Location: way up north	Have you tryed downloading models from the orcad site? Bouth .lib and .olb 's are available, So why bother just download and replace/add ur libs ? http://www.orcadpcb.com/pspice/models.asp?bc=F

22nd September 2004, 08:10 AM	#8
djdamix diyAudio Member Join Date: Jun 2004 Location: Lyon	ok, thanks a lot for the link , my lib where not up to date ...