|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
19th September 2004, 05:34 PM
|
#1 |
|
diyAudio Member
Join Date: Mar 2003
Location: Dawson Creek, British Columbia
|
REQ Comment on PCB Layout
I've laid out a new PCB board for a amp.
Any ideas on where i should change the design?? It was laid out with Express PCB.. Exp PCB
__________________
Ralph Electronics Tech. |
|
|
19th September 2004, 07:36 PM
|
#2 |
|
diyAudio Member
Join Date: Mar 2003
Location: Dawson Creek, British Columbia
|
Sorry all.. Found a bunch of errors in the original. Namely B- missing from Output Stage. I was able to move things around and get some of the upper traces removed.
Updated is the fixed board. But its being updated as we speak.. I'll try and incorporate everyones recommendations..
__________________
Ralph Electronics Tech. |
|
|
|
20th September 2004, 06:33 AM
|
#4 |
|
diyAudio Member
Join Date: Jul 2002
Location: Denmark - Jutland
|
Hello,
Why not use the two layers equally, so you can optimise the length of the traces? Generally I would clean up the PCB so your components are placed nicer, and maybe align some of the components to make the PCB nice to look at also. Good luck, and keep trying  \Jens |
|
|
|
20th September 2004, 10:27 PM
|
#5 | |
|
diyAudio Member
Join Date: Mar 2001
Location: Brazil
|
Quote:
It should be fairly easy to design all your paths on a single side, at most using just two wire bypasses, close to the output transistors. OK, another question: are you splitting your grounds between supply and input bars to be joined at your star ground? Carlos |
|
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Comment on my layout please | yan6 | Chip Amps | 4 | 22nd January 2009 05:28 PM |
| Comment on my layout please | Iain McNeill | Chip Amps | 0 | 22nd January 2009 01:51 AM |
| Please comment this PCB layout | megajocke | Solid State | 0 | 10th December 2008 03:20 PM |
| Plz, comment my layout (D1 I/V) | vit | Digital Source | 4 | 29th October 2004 07:26 PM |
| Please comment on parallel DAC layout | mozilla | Digital Source | 0 | 29th September 2004 10:03 AM |
| New To Site? | Need Help? |
