diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Looking for a good MOSFET amp and PCB (http://www.diyaudio.com/forums/solid-state/41112-looking-good-mosfet-amp-pcb.html)

soundNERD 17th September 2004 09:44 PM

Looking for a good MOSFET amp and PCB
 
What I want to do is build a MOSFET subwoofer amp. I was planning on building something with 2 chipamps (testing the difference between a LM3886 and a LM3875 bridged), but do not think that will be enough power. What I want is a simple 200-400W into 8ohm MOSFET amp.

Simple is better, and so is designs that come with a PCB layout already.

Thanks in advance for the help with this project.

2pist 18th September 2004 01:49 AM

Mr. Slone has an amp for every need. You need his book "High-Power Audio Amplifier Construction Manual" I have built a number of his projects and you can purchase boards on his web site.
http://www.sealelectronics.com/index.html

Diragono 18th September 2004 01:55 AM

I would definately check ebay... if not, I'd check www.iansoundnyder.com

kilowattski 18th September 2004 08:35 PM

Diragono,

Either you are an 11 year old or an adult with the mind of an 11 year old. Try acting a bit more mature and loose the "Faggot" reference in your tag line. The link to the "Lusty Lumber Jack" site is not appreciated either. Most everyone here conducts themselves in a mature manor. The last thing we need here is someone to ruin it for all. You also may want to think about changing your info page also. While your stated interest in life may consume all of your time, you don't have to let the world know about it.


All times are GMT. The time now is 04:35 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2