Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Adjustable gain control for Sharp SX-9680/STK4231 II
Adjustable gain control for Sharp SX-9680/STK4231 II
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 31st August 2004, 05:44 AM   #1
rkc7 is offline rkc7  United States
diyAudio Member
rkc7's Avatar
Join Date: May 2004
Location: Toledo, OH
Default Adjustable gain control for Sharp SX-9680/STK4231 II

I have a Sharp SX-9680 2 channel amplifier. This thing is inexpensive and pretty bare bones. But, I'd like to put in a gain control because it puts out a good bit of noise at the current setting and it's somewhat inconvenient to have an amp I can't adjust the volume. Anyway, it uses the STK4231 II, and I found the datasheet, which lists a circuit which I don't think is identical to what this uses. What would I have to modify and with what value/type of pots where? Also, I was looking at Rod Elliot's site about his "Better volume control," and was wondering if that was any use to me. I'd like to know what I'd need to make both independent gains and a stereo gain, because I'm not sure which I would do yet.



I can provide a picture of the actual board if needed, but if the datasheet provides enough information to figure it out, then great!

I could probably figure this out on my own, but figure I'll save a lot of trouble just asking the people who know how to do it. So, thanks for any help!
Disclaimer: I may be wrong, I may be right. I'd rather believe that I do know what I'm talking about, but am always willing to be told I don't.
  Reply With Quote


Adjustable gain control for Sharp SX-9680/STK4231 IIHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
0-15V 0-120A adjustable PSU attempt with average current control. Eva Power Supplies 85 11th October 2015 09:57 AM
Filters - adjustable gain StefanTH Analog Line Level 6 27th November 2008 09:27 AM
Adjustable power supply to replace volume control Leolabs Solid State 8 11th July 2007 05:43 PM

New To Site? Need Help?

All times are GMT. The time now is 11:25 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio