diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   My first DIY amp project (http://www.diyaudio.com/forums/solid-state/38094-my-first-diy-amp-project.html)

macgyver 19th July 2004 09:47 PM

My first DIY amp project
 
2 Attachment(s)
Amplifier is based on Hitachi Mosfet pair (2SJ162 and 2SK1058). I used a design from finnish book "Tee-Itse-Hifilaitteita".
Output power: 2*100W @ 8ohm. Dual mono. Two 12v papst fans running at 5v (Not in the picture).

macgyver 19th July 2004 09:49 PM

2 Attachment(s)
Another picture.

macgyver 20th July 2004 02:01 PM

No comments?!

LBHajdu 20th July 2004 02:08 PM

I think you could get more comments if you posted the schematic, and some comments about the sound. I like the blocks of wood on the side the make the case look a lot nicer then seeing mounting brackets.

larryg 20th July 2004 07:15 PM

Very nice construction!!:)

Fritzell 21st July 2004 10:54 AM

Looks nice! Tell more about the sound, power and the circuit schematic.

Johnix 23rd July 2004 01:02 PM

Nice looking amp.

how does it sound ?


All times are GMT. The time now is 12:41 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2