Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

shielding driver
shielding driver
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 28th May 2002, 02:51 AM   #1
blabley is offline blabley
diyAudio Member
Join Date: Apr 2002
Default shielding driver

The project I'm currently working on uses a simple lm3886 amp circuit. This powers a small horn driver. The horn driver, when installed in the casing, is placed about 1 cm abover the lm3886 circuit board. That is, the magnet of the horn driver is 1 cm abover the circuit. The magnet is only about 4 or 5 cm in diameter. Is this layout , with the magnet so close to the board, going to give me trouble? Should I shield the horn driver from the circuit board? The lm3886 chip itself is about 1 to 2 cm to the side of the magnet attached to the heat sink.

  Reply With Quote
Old 28th May 2002, 03:23 AM   #2
mrfeedback is offline mrfeedback  Australia
diyAudio Member
mrfeedback's Avatar
Join Date: Feb 2002
Location: Perth, Australia.
Hi blabley,
The magnetic field should not cause misoperation of your amplifier circuit, but it will add a sound flavour to the resultant.
Try it and experiment.

Regards, Eric.
  Reply With Quote


shielding driverHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Shielding? ROBSCIX Analog Line Level 7 27th October 2006 06:28 PM
EMI shielding... how? taj Parts 10 16th March 2006 03:23 AM
Shielding KornChild5 Everything Else 0 3rd May 2005 07:37 AM
RFI/EMI Shielding, is it necessary? mkruger Parts 1 22nd April 2004 06:54 AM
driver distance requiring shielding timsch75 Multi-Way 3 3rd August 2003 07:13 PM

New To Site? Need Help?

All times are GMT. The time now is 08:53 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio