diyAudio (
-   Solid State (
-   -   I need help! (

chlo 29th June 2004 12:07 PM

I need help!

I have a problem with my amplifier (cyrus 7). I connected a CDP to the amp and caused a pop sound on one speaker. The amp is noisy on that speaker since and always produces a pop sound when I select to that input source even I turn the volume at minimal point. I suspect something has burned! Does anyone has experience with this.

Many thanks in advance.


boholm 29th June 2004 12:13 PM

Does it make a scratching noise, when you turn the volume?

chlo 29th June 2004 12:29 PM

yes, it gives humping noise on one chanel.


boholm 29th June 2004 01:12 PM

It then sounds like you've got DC somewhere. Please check that your amplifier - without the CDP connected - does not scratch turning the volume. If it does, then the amplifier has a DC problem. If not, then the CDP has a DC problem. If you have a voltmeter and know electronics you have a chance of fixing. Otherwise you need qualified help.

All times are GMT. The time now is 06:31 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2