Removing Shunted Vas Capacitor - Page 2 - diyAudio
Go Back   Home > Forums > Amplifiers > Solid State
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 3rd July 2004, 01:56 AM   #11
lubbie is offline lubbie  Canada
diyAudio Member
Join Date: Mar 2003
Location: Dawson Creek, British Columbia
Send a message via MSN to lubbie
I'll do one better.. Here is a link to a early version of the amp.. Later versions had slight mods.
Electronics Tech.
  Reply With Quote
Old 3rd July 2004, 03:11 AM   #12
Eva is offline Eva  Spain
diyAudio Member
Eva's Avatar
Join Date: Oct 2003
Location: Near the sea
Send a message via MSN to Eva
This circuit employs tricky feedback. It has two pole-zero networks so open loop gain may drop at a slope slighty higher than 6dB/oct. It also features direct feedback from the VAS collector to the inverting input and this may be done in order to avoid a miller capacitor. At first sight, it looks like the designer got the maximum gain-bandwith product available from those transistors without compromising stability
  Reply With Quote
Old 3rd July 2004, 03:32 AM   #13
The one and only
Nelson Pass's Avatar
Join Date: Mar 2001
Try a shunt capacitor in series with a resistor.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
removing input or output capacitor help milen007 Parts 12 11th September 2008 04:47 AM
Shunted volume: pot & resistor values Sanaka Everything Else 20 13th February 2008 02:07 AM
Removing a pot. gonzii Tubes / Valves 4 4th July 2005 08:15 AM
How to wire a Shunted, Fake Law Pot? Sanaka Everything Else 2 8th May 2002 12:21 AM
Help! (with shunted volyme controll) hifi Solid State 6 28th January 2002 12:39 AM

New To Site? Need Help?

All times are GMT. The time now is 02:42 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2