Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

Strange ampli problem, pls help
Strange ampli problem, pls help
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 10th June 2004, 10:04 AM   #1
cosma is offline cosma  Italy
diyAudio Member
 
Join Date: Jun 2004
Location: Rome
Default Strange ampli problem, pls help

Hi all,

I'm a newbie here, and I post to find some help about a problem with my ampli. Not sure if I'm posting in the right place, can anyone help?

It's a multi-channel car amplifier (Alpine MRP-F320, 5 channels), but the 2nd doesn't work (the others work fine). The strange thing is that, if I plug only the RCA signal, excluding the ground, the ch. works, with a much lower volume than other channels..

I get the same effect connecting the RCA signal from the cable to the RCA input ground.

Any ideas of the damage? Can be simple to repair? Thanks in advance for the help.
  Reply With Quote
Old 10th June 2004, 11:42 AM   #2
djk is offline djk
diyAudio Member
 
djk's Avatar
 
Join Date: Feb 2001
Location: USA
Look for a burnt ground trace near the RCAs

When the main power ground goes open (from the car hitting a bump or whatever) the signal ground has to carry the power supply current.

This can also burn a trace in the head unit in the dash.

There may also be additional damage.

I always use a transformer to get rid of this and nasty ground loops.

http://www.edcorusa.com/sound/matchers/s2s10k_10k.htm

This product is vastly better than the car stereo ones.
  Reply With Quote
Old 10th June 2004, 12:09 PM   #3
cosma is offline cosma  Italy
diyAudio Member
 
Join Date: Jun 2004
Location: Rome
Quote:
Originally posted by djk
[B]Look for a burnt ground trace near the RCAs

When the main power ground goes open (from the car hitting a bump or whatever) the signal ground has to carry the power supply current.
Ok.. still a doubt: with a burnt trace there should be no current flow, right? if so, I would get the same result either with rca ground connected and not..

Quote:
Originally posted by djk
[B]This can also burn a trace in the head unit in the dash.

There may also be additional damage.
I bought the ampli used, and it was already broken so I can't have other damage..
  Reply With Quote

Reply


Strange ampli problem, pls helpHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
strange hum problem zeus_threat Solid State 8 18th December 2007 02:55 PM
strange amp problem!!! moonchild Solid State 23 14th January 2006 12:05 PM
strange amp problem feelander Car Audio 1 8th June 2005 07:21 PM
Strange problem with amp lumanauw Solid State 10 12th March 2004 12:59 PM
Strange little problem (or maybe not so) elizard Chip Amps 8 4th January 2004 06:25 AM


New To Site? Need Help?

All times are GMT. The time now is 11:59 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki