|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Solid State Talk all about solid state amplification. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
21st April 2004, 08:30 PM
|
#1 |
|
diyAudio Member
Join Date: Apr 2004
Location: Pula
|
Marshall SRX Series
I have huge problem!!! I have a Marshall SRX Series ( 6 channel ) mixer with 150W amp inside. Nobody knows that Marshall produced something like that. I have some info about it...it is produced somewhere in Taiwan or Korea with license of Jim Marshall but ( there is always BUT ) I couldn't find nothing on the web about it.
It has MJ11015 and MJ11016 for power output... Some driver resistors and one trimmer has gone away so I NEED SCHEMATIC WITH SIMILAR OR EQUAL OUTPUT!!! I'm searching this shematic for 5-6 months but nothing. I would be very happy If somebody can help me! Thank you |
|
|
22nd April 2004, 06:58 AM
|
#2 |
|
diyAudio Member
Join Date: Apr 2003
Location: Copenhagen, Denmark
|
Hi,
If you post a quick schematic of the output, it should be possible to figure out the resistor and trimmer value 
__________________
Free Schematic and Service Manual downloads www.audio-circuit.dk, Company: www.dupont-audio.com, Joint venture: www.DupontMantra.com |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Quality of Hammond 300 series power transformers compared to 200 series? | G | Tubes / Valves | 10 | 3rd August 2012 07:32 AM |
| Three 10" 4Ohm subs, wired in series or series-parallel? | Nagamitsu | Car Audio | 24 | 10th May 2009 03:24 AM |
| Marshall MS-2 | Andronico | Instruments and Amps | 12 | 23rd July 2007 01:50 PM |
| Yamaha CA-series / CT-series parts | DragonMaster | Parts | 9 | 19th January 2007 07:48 PM |
| need help for Marshall PCB | Ahmad_tbp | Tubes / Valves | 2 | 24th April 2006 08:19 PM |
| New To Site? | Need Help? |
