Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Solid State Talk all about solid state amplification.

maybe this is too dumb a question...
maybe this is too dumb a question...
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th April 2004, 08:37 PM   #1
dannyspencer is offline dannyspencer  United Kingdom
diyAudio Member
 
Join Date: Apr 2004
Location: Cambridge, UK
Send a message via MSN to dannyspencer
Question maybe this is too dumb a question...

Hi sorry im new to the site! have tryed the search but can't find anything that spells it out for me

perhaps i am just too ignorant in this area!

my question is: What is a cheap, easy amplifier that i can use to basically drive a small speaker for my guitar?

If you interested basically what i am doing is building a talkbox guitar effect pedal but i wanted to build a small 10-20 watt amp that will drive a midrange speaker (rated at 8ohms)

therefore i presume i want a high gain thing? i know that i will have to but a preamp infront to get the distortion but i will do this with one of my fuzz pedals.

Can anyone help me out with schematic links etc? Im in the uk and parts need to be pretty availiable.

Thanks

Dan
  Reply With Quote
Old 18th April 2004, 07:50 AM   #2
pinkmouse is offline pinkmouse  Europe
diyAudio Moderator
 
pinkmouse's Avatar
 
Join Date: Apr 2002
Location: Rotherham, England
maybe this is too dumb a question...
Hi Dan

If you have little experience at construction, you should head on over to the Chip Amps group, and have a look at the various Gain Clones around. Don't be put off by all the comments about this or that resistor or cap, they work very well with Maplins standard components, and should only take a few hours to build.

Good luck!
__________________
Rick: Oh Cliff / Sometimes it must be difficult not to feel as if / You really are a cliff / when fascists keep trying to push you over it! / Are they the lemmings / Or are you, Cliff? / Or are you Cliff?
  Reply With Quote
Old 18th April 2004, 01:55 PM   #3
li_gangyi is offline li_gangyi  Singapore
diyAudio Member
 
li_gangyi's Avatar
 
Join Date: Jun 2003
Location: Woodlands Circle
you'll probably need a tone control circuit...something like a fender tone stack or similiar...they have are different compared to a "standard" Low Mid and High tone control...got it's ranges set differently...
__________________
Kids in the back seat cause accidents...Accidents in the back seat cause kids...
  Reply With Quote
Old 18th April 2004, 03:26 PM   #4
jaycee is offline jaycee  United Kingdom
diyAudio Member
 
Join Date: Apr 2004
Location: Norwich, UK
If you have no experience building a discrete amp, build one based around a National LM1875. You should be able to make that on Veroboard, and run it from an 18-0-18 transformer.

Maplin used to sell it, but they don't any more. You can always get it as a sample from the National website - www.national.com. Everything else you should be able to get from Maplin. If you want I will compile you a parts list and send it via e-mail (I've talked about chip amps twice now in a solid state forum, don't wanna get into trouble!)

If you do have some experience, Rod Elliot does a good load of guitar projects on his website, including amps. He also has PCB's to buy for many of his projects - sound.westhost.com
  Reply With Quote
Old 18th April 2004, 03:29 PM   #5
pinkmouse is offline pinkmouse  Europe
diyAudio Moderator
 
pinkmouse's Avatar
 
Join Date: Apr 2002
Location: Rotherham, England
maybe this is too dumb a question...
Quote:
Originally posted by jaycee
(I've talked about chip amps twice now in a solid state forum, don't wanna get into trouble!)

No problem, I am watching closely, and if we get too "chippy" I'll move as appropriate.
__________________
Rick: Oh Cliff / Sometimes it must be difficult not to feel as if / You really are a cliff / when fascists keep trying to push you over it! / Are they the lemmings / Or are you, Cliff? / Or are you Cliff?
  Reply With Quote
Old 18th April 2004, 03:33 PM   #6
jaycee is offline jaycee  United Kingdom
diyAudio Member
 
Join Date: Apr 2004
Location: Norwich, UK
Quote:
Originally posted by pinkmouse

No problem, I am watching closely, and if we get too "chippy" I'll move as appropriate.
Righto

The main reason I've mentioned them twice so far, is that it's been what I suspect to be beginners or novices in both cases, and a discrete amp is a lot of components/money/power to be chucking about and blowing up if it goes wrong (I know this from experience )

It's very disheartening to see sommat you've made smoke, especially if you've spent a good deal of cash on it. I built my first power supply when I was 12, and a mistake with the bridge rectifier ended up with the transformer shorting every half cycle - eventually there was a loud BANG as it overheated. It took me 6 years before I dared mess with a transformer again
  Reply With Quote
Old 18th April 2004, 04:57 PM   #7
peranders is offline peranders  Sweden
Electrons are yellow and more is better!
diyAudio Member
 
peranders's Avatar
 
Join Date: Apr 2002
Location: Göteborg, Sweden
maybe this is too dumb a question...
Default Re: maybe this is too dumb a question...

Quote:
Originally posted by dannyspencer
Hi sorry im new to the site! have tryed the search but can't find anything that spells it out for me

perhaps i am just too ignorant in this area!
Hint: Please write a thread subject which actually describes the question. Forget about knowledge level or why you ask. Sometimes it's also hard to search and get something out of it. You don't have to be a newbie to experience that.

Moderator hat on
__________________
/Per-Anders (my first name) or P-A as my friends call me
Group buy: DCT03 DC trap for big toroidal transformers. Sign up for interest HERE. 52 pcb's in order. 27 paid.
  Reply With Quote

Reply


maybe this is too dumb a question...Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dumb question, but... johnm Tubes / Valves 3 13th June 2008 10:14 PM
Dumb question. G Tubes / Valves 2 16th January 2008 08:16 PM
Dumb speaker question Regis Multi-Way 15 8th February 2004 05:37 AM
Thi is probably a dumb question.... Konnan101 Multi-Way 4 11th January 2004 01:40 PM
Dumb Zen V4 Question Panelhead Pass Labs 4 26th April 2003 04:15 PM


New To Site? Need Help?

All times are GMT. The time now is 12:38 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki