diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   Crown Xls602 Power Amplifier (http://www.diyaudio.com/forums/solid-state/31686-crown-xls602-power-amplifier.html)

jonz 5th April 2004 10:40 PM

Crown Xls602 Power Amplifier
 
I was thinking about buying this amp to power two 15" Tempests..what you guys think of it's capabilities..it's rated at about 600 watts into 4 ohms per side...Right now I am powering them with a Carver TFM35 ..at 350 per side...is it worth the extra expense or I won't see a diffrence?

djk 6th April 2004 07:14 AM

As long as you are not playing sinewaves, the Carver has more peak power than the Crown.

Frank Berry 6th April 2004 08:19 AM

I installed three of these Crown XLS-602 amplifiers at a local club.
The only problem I've had is with the cheap level controls.
They all failed quickly. I simply removed them from the circuit until I can replace them with better quality pots.


All times are GMT. The time now is 10:54 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2