JLH 10W Amp - Protel Simulation

DomKo · 4th April 2004, 09:41 AM

Hi,

Is there any JLH 10W Amp Protel Simulation file?
I am looking for the protel simulation file.

Thank you for your assistance.

regards,

DKO

millwood · 4th April 2004, 04:27 PM

I have the schematic documents (for protel dxp demo) if that's what you meant.

it is not difficult to set one up in protel dxp either.

millwood · 4th April 2004, 04:28 PM

to just clarify it a little, it was tailored a little bit to fit my particular set-up (like voltages and resistor / cap values but you can simply adjust all of them if you like). it is for jlh1969.

DomKo · 4th April 2004, 06:15 PM

Hi Millwood,

My amp version is updated JLH.
jlh1969 is OK. I can adjust the detail of components.

I also want to compare both of them by simulation.

Thank you very much.

regards,

DKO

millwood · 4th April 2004, 06:22 PM

here you go.

I included a few files (I have simulated a lot of jlh designs), and those files do contain some extra components (like caps or resistors) used in those simulations so you may want to get rid of them.

at lease they will save you some time reentering those in protel (dxp demo I used).

millwood · 4th April 2004, 06:23 PM

I have the original jlh, my bjt version of the original jlh (jlh1969), and then the mosfet version using irf devices (just in case).

DomKo · 5th April 2004, 06:03 PM

Hi Millwood,

What is the version of your Protel Software?
I only get the Protel 98.

Thank you for your assistance.

DKO

millwood · 5th April 2004, 08:36 PM

I am using protel dxp (a demo version). Not sure if it is backward compatible to your protel (which sounded like an older version of the same thing).

DomKo · 6th April 2004, 04:43 AM

Hi Millwood,

Sorry. it is not backward comp.
I am going to order the dxp demo.
It takes time to get it from protel.

Best regards,

DKO

DomKo · 28th May 2004, 01:38 AM

Hi Millwood,

I try to run the simulation of JLH1969 and get the NetList generation
error with Protel DXP.

Would you pls send the whole project file including lib and necessary files to me again?

I only need to simulate 1969 version. If you have the 'JLH Class-A Update' with the Higher Power Version, you can send it to me too.

I want to compare the Original 1969 and Updated Higher Power version.

Thank you very much.

Best regards

DKO

4th April 2004, 09:41 AM	#1
DomKo diyAudio Member Join Date: Oct 2003 Location: Richmond	JLH 10W Amp - Protel Simulation Hi, Is there any JLH 10W Amp Protel Simulation file? I am looking for the protel simulation file. Thank you for your assistance. regards, DKO

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A little help with Protel DXP?	NeoY2k	Parts	1	18th October 2008 02:53 PM
PROTEL DXP Help	D_GR8_1	Everything Else	6	18th November 2004 04:25 AM
Need Help with Protel	D_GR8_1	Chip Amps	0	17th November 2004 05:05 AM
Protel Help	tool49	Everything Else	1	25th May 2004 04:15 PM
Protel Questions.	jleaman	Parts	9	13th May 2003 05:03 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th April 2004, 04:27 PM	#2
millwood Account Disabled Join Date: Apr 2003 Location: US	I have the schematic documents (for protel dxp demo) if that's what you meant. it is not difficult to set one up in protel dxp either.

4th April 2004, 04:28 PM	#3
millwood Account Disabled Join Date: Apr 2003 Location: US	to just clarify it a little, it was tailored a little bit to fit my particular set-up (like voltages and resistor / cap values but you can simply adjust all of them if you like). it is for jlh1969.

4th April 2004, 06:15 PM	#4
DomKo diyAudio Member Join Date: Oct 2003 Location: Richmond	Hi Millwood, My amp version is updated JLH. jlh1969 is OK. I can adjust the detail of components. I also want to compare both of them by simulation. Thank you very much. regards, DKO

4th April 2004, 06:23 PM	#6
millwood Account Disabled Join Date: Apr 2003 Location: US	I have the original jlh, my bjt version of the original jlh (jlh1969), and then the mosfet version using irf devices (just in case).

5th April 2004, 06:03 PM	#7
DomKo diyAudio Member Join Date: Oct 2003 Location: Richmond	Hi Millwood, What is the version of your Protel Software? I only get the Protel 98. Thank you for your assistance. DKO

5th April 2004, 08:36 PM	#8
millwood Account Disabled Join Date: Apr 2003 Location: US	I am using protel dxp (a demo version). Not sure if it is backward compatible to your protel (which sounded like an older version of the same thing).

6th April 2004, 04:43 AM	#9
DomKo diyAudio Member Join Date: Oct 2003 Location: Richmond	Hi Millwood, Sorry. it is not backward comp. I am going to order the dxp demo. It takes time to get it from protel. Best regards, DKO

28th May 2004, 01:38 AM	#10
DomKo diyAudio Member Join Date: Oct 2003 Location: Richmond	Hi Millwood, I try to run the simulation of JLH1969 and get the NetList generation error with Protel DXP. Would you pls send the whole project file including lib and necessary files to me again? I only need to simulate 1969 version. If you have the 'JLH Class-A Update' with the Higher Power Version, you can send it to me too. I want to compare the Original 1969 and Updated Higher Power version. Thank you very much. Best regards DKO

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)