diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   mux two input to one... (http://www.diyaudio.com/forums/solid-state/27655-mux-two-input-one.html)

MaXiZ 5th February 2004 09:50 PM

mux two input to one...
 
Is possible to mux two input in one? Pratically from stereo to mono?
I need these becouse i've build a 4.1 system with a 3-way crossover and now i would like to mux the 4 low frequency of each crossover to one...
Do i need a special circuit o just i need to connect the 4wire (one per each xover) at the Power amplifier input?
THanx!

sss 5th February 2004 10:43 PM

2 Attachment(s)
to mix R and L
use the next circuit

sss 5th February 2004 10:48 PM

btw u dont have to use the op amp , that way u can mix as many channels as u want

MaXiZ 6th February 2004 05:59 AM

Quote:

that way u can mix as many channels as u want
Which way? :)

sss 6th February 2004 10:03 AM

2 Attachment(s)
that way


All times are GMT. The time now is 08:21 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2