diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Solid State (http://www.diyaudio.com/forums/solid-state/)
-   -   balanced input problem (http://www.diyaudio.com/forums/solid-state/27158-balanced-input-problem.html)

Handel 30th January 2004 07:22 AM

balanced input problem
 
Hi!
I have an old ML no.23 amplifier wich have balanced inputs. When I am using those bal inputs, there is a lot of attenuation in right channel compared to left channel. There is no problem in unbalanced connection. Can anybody help me?

Br. Handel

EchoWars 31st January 2004 10:44 AM

Swap the cables around??

Anyway, deserves a bump...

Vek 1st February 2004 03:00 PM

Perhaps a broken connection at the input, so you only get one of the two symmetric signals. That way you will lose 6dB (half of the voltage swing)!

Interchange the cabling to test if the issue stays at the right channel.
If it moves, your source or cable seems to be faulty.

If it stays, it must will be an issue with your amp, perhaps simply a defect soldering at the connector.

Regards


All times are GMT. The time now is 11:42 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2